574063
77
Zoom out
Zoom in
Previous page
1/136
Next page
Using other functions 08
77
En
Switching the speaker terminals
If you selected Speaker B at Speaker system
setting on page 105, you can switch between
speakers using the SPEAKERS button. If you
selected Normal(SB/FH), Normal(SB/FW),
Front Bi-Amp or ZONE 2, the button will
simply switch your main speaker terminals on
or off. The options below are for the Speaker B
setting only.
1
•Use
SPEAKERS
on the front panel to
select a speaker terminal setting.
As mentioned above, if you have selected
Normal(SB/FH) or Normal(SB/FW), the
button will simply switch your main speaker
terminals (A) on or off.
Press repeatedly to choose a speaker terminal
option:
SPA – Sound is output from the A-
speaker terminals (up to 7 channels
(including surround back channels),
depending on the source).
SPB – Sound is output from the two
speakers connected to the B-speaker
terminals. Multichannel sources will not be
heard.
SPAB – Sound is output from the A-
speaker terminals (up to 5 channels,
depending on the source), the two
speakers connected to the B-speaker
terminal, and the subwoofer. The sound
from B-speaker terminals will be the same
as the sound from the A-speaker terminals
(multichannel sources will be downmixed
to 2 channels).
SP (off) – No sound is output from the
speakers.
Using the MULTI-ZONE controls
The following steps use the front panel controls
to adjust the sub zone volume and select
sources. See MULTI-ZONE remote controls on
page 78.
1Press
MULTI-ZONE ON/OFF
on the front
panel.
Each press selects a MULTI-ZONE option:
ZONE 2 ON – Switches the MULTI-ZONE
feature on
MULTI ZONE OFF – Switches the MULTI-
ZONE feature off
The MULTI-ZONE indicator lights when the
MULTI-ZONE control has been switched ON.
2Press
MULTI-ZONE CONTROL
on the
front panel.
When the receiver is on,
2
make sure that
any operations for the sub zone are done
while ZONE 2 shows in the display. If this is
not showing, the front panel controls affect
the main zone only.
3Use the
INPUT SELECTOR
dial to select
the source for the sub zone.
For example, ZONE 2 CD-R sends the source
connected to the CD-R inputs to the sub room
(ZONE 2).
•If you select TUNER, you can use the tuner
controls to select a preset station (see
Saving station presets on page 52 if you’re
unsure how to do this).
3
VSX-30 model only: iPod/USB, INTERNET
RADIO and SIRIUS function cannot be
selected for the MULTI-ZONE feature.
Note
1 • The subwoofer output depends on the settings you made in Manual speaker setup on page 104. However, if SPB
is selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed).
• All speaker systems (except Speaker B connections) are switched off when headphones are connected.
2 If the receiver is in standby, the display is dimmed, and ZONE 2 DVD for example shows in the display.
3 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also
changes the station in the other zone. Please be careful not to change stations when recording a radio broadcast.
VSX-31_30_UC.book 77 ページ 2010年8月25日 水曜日 午前9時28分
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-31 in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info