586461

Pioneer VSX-1130 K Manual

122
Zoom out
Zoom in
Previous page
1/137
Next page
122
FAQ
14
Wireless LAN
Symptoms Causes Remedies
Network cannot be
accessed via wireless LAN.
SSID uses double-byte characters
such as in the Japanese language.
This receiver is compatible only with single-byte alphanu-
merical characters and some symbols such as the under-
bar. If characters other than these are used, change the
SSID before executing network settings. Refer to the user’s
manual for your router for information on SSID.
There is distance or obstacles
between this receiver and equipment
including the wireless LAN router.
Improve the wireless LAN environment such as making the
distance between this receiver and equipment including
wireless LAN router closer.
There is a microwave oven or other
device generating electromagnetic
waves near the wireless LAN envi-
ronment.
Use the system in a place away from microwave ovens or
others device generating electromagnetic waves.
Avoid using devices generating electromagnetic waves as
much as possible when using the system with the wireless
LAN.
Multiple devices are connected to
the wireless LAN router.
When connecting multiple devices to the wireless LAN
router, the IP address of the connected devices must be
changed.
The wireless LAN connection set-
tings of this receiver and equipment
such as wireless LAN router is not
correct.
When wireless LAN connections for this receiver and wire-
less LAN router are not setup, the connection between this
receiver and equipment such as the wireless LAN router
must be set.
The IP address settings of this
receiver do not match the settings of
the wireless LAN router and the like.
Check the IP address settings (including DHCP settings)
of this receiver.
If the receiver’s DHCP setting is “ON”, turn the receiver’s
power off, then turn the power back on.
Check that the IP address for this receiver matches the
settings of the wireless LAN router.
If the receiver’s DHCP setting is “OFF”, set an IP address
matching the network of the base unit (wireless LAN
router, etc.).
For example, if the wireless LAN router’s IP address
is “192.168.1.1”, set the receiver’s IP address to
“192.168.1.XXX” (*1), the subnet mask to “255.255.255.0”,
the gateway and DNS to “192.168.1.1”.
(*1) Set the “XXX” in “192.168.1.XXX” to a number between
2 and 248 that is not assigned to other devices.
The access point is set to conceal
the SSID.
In this case, it may not be shown in the access point list
screen. If it is not shown, set the SSID etc. of this receiver.
The access point’s security settings
use WEP 152-bit length code key or
shared key authentication.
The receiver does not support WEP 152-bit length code key
or shared key authentication.
There is a possibility that the chan-
nel used by the wireless network is
a wireless channel that cannot be
used with this receiver.
Change the wireless network channel to a wireless channel
that can be used with this receiver, then check the con-
nection.
Wireless Direct is not
connected when the main
power of this receiver is
turned off once and turned
on again.
The Security Protocol is set to
None.
Because there are security risks, settings are necessary to
connect to Wireless Direct again. Set Security Protocol of
Wireless Direct to WEP (page 56 ).
　
… 122 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-1130 K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-1130 K in the language / languages: English as an attachment in your email.

The manual is 20,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-1130 K

Pioneer VSX-1130 K User Manual - German - 146 pages

Pioneer VSX-1130 K User Manual - Dutch - 146 pages

Pioneer VSX-1130 K User Manual - French - 145 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info