Manual Pioneer VSX-1130 K (page 67 of 137) (English)

586461

Zoom out

Zoom in

1/137

Basic playback

Listening to the radio

The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and

manual (step) tuning functions. If you already know the frequency of the station you want, see Tuning directly to a

station below. Once you are tuned to a station you can memorize the frequency for recall later-see Saving station

presets on page 67 for more on how to do this.

1 Press TUNER to select the tuner.

2 Use BAND to change the band (FM or AM), if necessary.

3 Tune to a station.

There are three ways to do this:

! Automatic tuning – To search for stations in the currently selected band, press and hold TUNE +/– for about

a second. The receiver will start searching for the next station, stopping when it has found one. Repeat to

search for other stations.

! Manual tuning – To change the frequency one step at a time, press TUNE +/–.

! High speed tuning – Press and hold TUNE +/– for high speed tuning. Release the button at the frequency

you want.

Improving FM sound

VSX-1130 only

If the TUNED or STEREO indicator doesn’t light when tuning to an FM station because the signal is weak, press

MPX to switch the receiver into mono reception mode. This should improve the sound quality and allow you to

enjoy the broadcast.

Tuning directly to a station

1 Press TUNER to select the tuner.

2 Use BAND to change the band (FM or AM), if necessary.

3 Press D.ACCESS (Direct Access).

4 Use the number buttons to enter the frequency of the radio station.

For example, to tune to 106.00 (FM), press 1, 0, 6, 0, 0.

If you make a mistake halfway through, press D.ACCESS twice to cancel the frequency and start over.

Saving station presets

If you often listen to a particular radio station, it’s convenient to have the receiver store the frequency for easy

recall whenever you want to listen to that station. This saves the effort of manually tuning in each time. This

receiver can memorize up to 63 stations, stored in seven banks, or classes (A to G) of 9 stations each.

1 Tune to a station you want to memorize.

See Listening to the radio on page 67 for more on this.

2 Press TOOLS (TUNER EDIT).

The display shows PRESET MEMORY, then a blinking memory class.

3 Press CLASS to select one of the seven classes, then press PRESET +/– to select the station

preset you want.

You can also use the number buttons to select a station preset.

4 Press ENTER.

After pressing ENTER, the preset class and number stop blinking and the receiver stores the station.

Listening to station presets

1 Press TUNER to select the tuner.

2 Press CLASS to select the class in which the station is stored.

Press repeatedly to cycle through classes A to G.

3 Press PRESET +/– to select the station preset you want.

! You can also use the number buttons on the remote control to recall the station preset.

Naming station presets

For easier identification, you can name your station presets.

1 Choose the station preset you want to name.

See Listening to station presets on page 67 for how to do this.

2 Press TOOLS (TUNER EDIT).

The display shows PRESET NAME, then a blinking cursor at the first character position.

3 Input the name you want.

Use i/j (or TUNE i/j of front panel) to select a character, k/l (or PRESET k/l of front panel) to set the

position, and ENTER to confirm your selection.

Notes

! To erase a station name, simply repeat steps 1 to 3 and input eight spaces instead of a name.

! Once you have named a station preset, you can press DISP when listening to a station to switch the display

between name and frequency.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-1130 K in the language / languages: English as an attachment in your email.

The manual is 20,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-1130 K

Pioneer VSX-1130 K User Manual - German - 146 pages

Pioneer VSX-1130 K User Manual - Dutch - 146 pages

Pioneer VSX-1130 K User Manual - French - 145 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-1130 K Manual

Product: