548143
58
Zoom out
Zoom in
Previous page
1/69
Next page
8
Chapter
8
58
4
61
9
Using the MULTI-ZONE feature (VSX-1029 only)
MULTI-ZONE listening
This receiver can power up to two independent systems in
separate rooms after you have made the proper MULTI-ZONE
connections.
Different sources can be playing in two zones at the same
time or, depending on your needs, the same source can also
be used. The main and sub zones have independent power
(the main zone power can be off while the sub zone is on) and
the sub zone can be controlled by the remote or front panel
controls.
Making MULTI-ZONE connections
It is possible to make these connections if you have a separate
speakers for your sub zone.
Note
You can listen to the built-in tuner and other analog audio
sources in the sub zone.
You can’t use sound controls (such as the bass/treble
controls or Midnight listening) or any surround modes with
a separate amplifier in the sub zone. You can, however, use
the features available with your sub zone amplifier.
Use this after selecting ZONE 2 for The Speaker System
setting (VSX-1029 only) on page 57 on the Home Menu.
Connect a speaker to the SURROUND BACK/ZONE2
terminal on the rear of this receiver.
For details, see VSX-1029 connection diagram on
page 14
.
You should have a pair of speakers attached to the sub
zone amplifier as shown.
Using the MULTI-ZONE controls
The following steps use the front panel controls to select
sources. See MULTI-ZONE remote controls
below.
1
Press
CONTROL MULTI-ZONE ON/OFF
button on the
front panel.
The ZONE indicator lights when the MULTI-ZONE control
has been switched ON.
When the receiver is on, make sure that any operations
for the sub zone are done while ZONE lights in the
display. If this is not showing, the front panel controls
affect the main zone only. If the receiver is in standby,
the display is dimmed, and ZONE continues to light in
the display.
2
Press
CONTROL MULTI-ZONE ON/OFF
button on the
front panel.
Each press will switch between main zone and sub zone
control.
If no operation is performed for a few seconds, MULTI-
ZONE CONTROL mode will automatically end.
3
Press
INPUT SELECTOR
dial to select the source for the
zone you have selected.
For example, Z2: DVD sends the source connected to the
DVD inputs to the sub room (ZONE 2).
If you select TUNER, you can use the tuner controls to
select a preset station (see Saving station presets
on
page 36 if you’re unsure how to do this). The tuner
cannot be tuned to more than one station at a time.
Therefore, changing the station in one zone also
changes the station in the other zone. Please be
careful not to change stations when recording a radio
broadcast.
4
Use
MASTER VOLUME
dial to adjust the volume for the
sub zone.
5
When you’re finished, press
CONTROL MULTI-ZONE
ON/OFF
again to return to the main zone controls.
You can also press
CONTROL MULTI-ZONE ON/OFF
button on the front panel to switch off all output to the
sub zone.
Note
You won’t be able to switch the main zone off completely
unless you’ve switched off the MULTI-ZONE control first.
If you don’t plan to use the MULTI-ZONE feature for a while,
turn off the power in both the sub and main rooms so that
this receiver is in standby.
MULTI-ZONE remote controls
With button pressed, press the buttons below to
operate the corresponding zone.
The following table shows the possible MULTI-ZONE remote
controls:
SPEAKERS BAND
CONTROL
-
MULTI-ZONE
-
ON/OFF
Button What it does
STANDBY/
ON
Switches on/off power in the sub zone.
Input function
buttons
Use to select the input source directly in the
sub zone.
VOLUME +/–
Use to set the listening volume in the sub zone.
MUTE
Mutes the sound or restores the sound if it has
been muted (adjusting the volume also
restores the sound).
SHIFT
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-1024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-1024 in the language / languages: English as an attachment in your email.

The manual is 17,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-1024

Pioneer VSX-1024 Quick start guide - English - 20 pages

Pioneer VSX-1024 User Manual - Spanish - 69 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info