455184
35
Zoom out
Zoom in
Previous page
1/184
Next page
En
35
06
Listening to your system
Listening to your system
Important
! The listening modes and many features
described in this section may not be available
depending on the current source, settings and
status of the receiver.
Auto playback
There are many ways to listen back to sources
using this receiver, but the simplest, most
direct listening option is the Auto Surround
feature. The receiver automatically detects what
kind of source you’re playing and selects multi-
channel or stereo playback as necessary.
% While listening to a source,
press AUTO/ALC/DIRECT
(AUTO SURR/ALC/STREAM DIRECT) for
auto playback of a source.
AUTO SURROUND shows briefly in the dis-
play before showing the decoding or playback
format. Check the digital format indicators in
the front panel display to see how the source is
being processed.
! If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding
format will automatically be selected and
shows in the display.
! When listening to the FM radio, the Neural
Surround feature is selected automatically
(see Using Neural Surround on page 31 for
more on this).
! When listening to the ADAPTER PORT
input, the SOUND RETRIEVER AIR feature is
selected automatically.
ALC – In the Auto level control (ALC) mode, this
receiver equalizes playback sound levels.
Also, the low and high frequency sounds, dia-
logs, surround effects, etc., that are difficult to
hear when the volume is low are adjusted to
be optimal for the volume level. This mode is
particularly optimum when listening at night.
Note
! When ALC is selected, the effect level can
be adjusted using the EFFECT parameter in
Setting the Audio options on page 46 .
Listening in surround sound
Using this receiver, you can listen to any source
in surround sound. However, the options avail-
able will depend on your speaker setup and the
type of source you’re listening to.
Standard surround sound
The following modes provide basic surround
sound for stereo and multichannel sources.
% While listening to a source, press
STANDARD (STANDARD SURROUND).
If necessary, press repeatedly to select a listen-
ing mode.
! If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding
format will automatically be selected and
shows in the display.
! If the surround back speakers are not
connected, 2 Pro Logic IIx becomes
2 Pro Logic II (5.1 channel sound).
With two channel sources, you can select from:
! 2 Pro Logic IIx MOVIE Up to 7.1 channel
sound (surround back), especially suited to
movie sources
! 2 Pro Logic IIx MUSIC Up to 7.1 channel
sound (surround back), especially suited to
music sources
! 2 Pro Logic IIx GAME – Up to 7.1 channel
sound (surround back), especially suited to
video games
! 2 PRO LOGIC 4.1 channel surround sound
(sound from the surround speakers is mono)
! 2 Pro Logic IIz HEIGHT Up to 7.1 channel
sound (front height)
! WIDE SURROUND MOVIE Up to 7.1
channel sound (front wide), especially suited
to movie sources
! WIDE SURROUND MUSIC Up to 7.1 channel
sound (front wide), especially suited to music
sources
! Neo:6 CINEMA7.1 channel sound
(surround back), especially suited to movie
sources
! Neo:6 MUSIC 7.1 channel sound (surround
back), especially suited to music sources
! Neural Surround Up to 7.1 channel sound
(surround back), especially suited to music
sources
! STEREO – The audio is heard with your sound
settings and you can still use the audio
options.
With multichannel sources, if you have con-
nected surround back, front height or front wide
speakers, you can select (according to format):
! 2 Pro Logic IIx MOVIE See above
! 2 Pro Logic IIx MUSIC See above
! Dolby Digital EX – Creates surround back
channel sound for 5.1 channel sources and
provides pure decoding for 6.1 channel
sources (like Dolby Digital Surround EX)
! DTS-ES – Allows you to hear 6.1 channel
playback with DTS-ES encoded sources
! DTS Neo:6 Allows you to hear 6.1 channel
playback with DTS encoded sources
! Neo:6 Allows you to hear 6.1 channel
playback
! 2 Pro Logic IIz HEIGHT See above
! WIDE SURROUND MOVIE See above
! WIDE SURROUND MUSIC See above
! STEREO – See above
! Straight Decode – Plays back without the
effects above.
Note
! When listening sources in
2 Pro Logic IIz HEIGHT mode, you can also
adjust the H.GAIN effect (see Setting the Audio
options on page 46 ).
! When listening to 2-channel sources in
Dolby Pro Logic IIx Music mode, there are
three further parameters you can adjust:
C.WIDTH,DIMENSION and PANORAMA. See
Setting the Audio options on page 46 to adjust
them.
! When listening to 2-channel sources in Neo:6
Cinema or Neo:6 Music mode, you can also
adjust the center image effect (see Setting the
Audio options on page 46 ).
! Neural Surround can be selected for
2-channel signals for which the input signal
is PCM (48 kHz or less), Dolby Digital, DTS or
analog 2-channel sources.
! The stereo mode can also be selected by
pressing the STEREO button on the remote
control.
! When listening through headphones, you can
select STEREO mode only.
Using the Advanced surround
effects
The Advanced surround effects can be used for
a variety of additional surround sound effects.
Most Advanced Surround modes are designed
to be used with film soundtracks, but some
modes are also suited for music sources. Try
different settings with various soundtracks to
see which you like.
% Press ADV SURR
(ADVANCED SURROUND) repeatedly to
select a listening mode.
! ACTION – Designed for action movies with
dynamic soundtracks
! DRAMA Designed for movies with lots of
dialog
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-1021K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-1021K in the language / languages: English, Spanish as an attachment in your email.

The manual is 20,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-1021K

Pioneer VSX-1021K Quick start guide - English, German - 156 pages

Pioneer VSX-1021K User Manual - German - 100 pages

Pioneer VSX-1021K Quick start guide - Dutch - 156 pages

Pioneer VSX-1021K Additional guide - Dutch - 27 pages

Pioneer VSX-1021K User Manual - Dutch - 98 pages

Pioneer VSX-1021K User Manual - Danish - 354 pages

Pioneer VSX-1021K Quick start guide - French - 156 pages

Pioneer VSX-1021K User Manual - French - 98 pages

Pioneer VSX-1021K Quick start guide - Italian - 156 pages

Pioneer VSX-1021K User Manual - Italian - 94 pages

Pioneer VSX-1021K User Manual - Swedish - 354 pages

Pioneer VSX-1021K Quick start guide - Spanish - 156 pages

Pioneer VSX-1021K User Manual - Norwegian, Finnish - 354 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info