574080
7
Zoom out
Zoom in
Previous page
1/35
Next page
7
Operations on the Receiver and USB Connections
In order to display the various data measured on the receiver on the computer’s screen, perform the
operations below to connect the USB device and transfer the receiver’s data.
1 Perform the “Full Auto MCACC” operation on the receiver. (See the receiver’s
Operating Instructions.)
The measurements here are not required if the “Full Auto MCACC” operation has already been
performed. Proceed to step 2.
2 Select “Output MCACC data” from “MCACC Data Check”. (See the receiver’s
Operating Instructions.)
The message “Please connect your USB memory for the MCACC data, then press OK to output them.”
appears on the monitor screen and the receiver enters the transmission standby mode. It is ready to
send data to your USB device. (The display screen may differ, depending on the receiver’s model.)
3 Connect your USB device to the USB terminal on the front panel, then select
“OK”.
(The illustration of the receiver may differ, depending on the receiver’s model.)
“Please wait...” will be displayed on the screen and transmission of measurement data to the USB
device will begin. Transmission is complete when “Complete” is displayed.
This completes the preparations for sending the measurement data to your USB device.
(To send the data, proceed to the next section Application Operations.)
a. Speaker Setting
b. Channel Level
c. Speaker Distance
2.MCACC Data Check
d. Standing Wave
e. Acoustic Cal EQ
f. Group Delay
g. Output MCACC data
A/V RECEIVER
Exit Return
Please connect your USB memory for the MCACC data,
then press OK to output them.
2g.Output MCACC data
Exit Cancel
A/V RECEIVER
OK
MASTER
VOLUME
MCACC
SETUP MIC
VIDEO CAMERA
iPod
iPhone
USB HDMI 5
Continue
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-1020-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-1020-K in the language / languages: English as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-1020-K

Pioneer VSX-1020-K User Manual - English - 400 pages

Pioneer VSX-1020-K User Manual - English - 260 pages

Pioneer VSX-1020-K User Manual - German - 35 pages

Pioneer VSX-1020-K User Manual - German, Dutch - 532 pages

Pioneer VSX-1020-K User Manual - Danish - 338 pages

Pioneer VSX-1020-K User Manual - French - 35 pages

Pioneer VSX-1020-K User Manual - French - 400 pages

Pioneer VSX-1020-K User Manual - Italian - 35 pages

Pioneer VSX-1020-K User Manual - Italian - 532 pages

Pioneer VSX-1020-K User Manual - Portuguese - 86 pages

Pioneer VSX-1020-K User Manual - Swedish - 338 pages

Pioneer VSX-1020-K User Manual - Spanish, Spanish - 532 pages

Pioneer VSX-1020-K User Manual - Spanish - 260 pages

Pioneer VSX-1020-K User Manual - Norwegian, Finnish - 338 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info