455217
104
Zoom out
Zoom in
Previous page
1/128
Next page
Additional information12
104
En
No sound from surround
back speakers.
(Continued)
• If the source does not have 6.1 playback channels, make sure that surround
back channel processing is set to SBch ON and a surround mode is selected
(see Listening in surround sound on page 53).
• Check the speaker connections (see Connecting the speakers on page 18).
If only one surround back speaker is connected, make sure it’s connected to
the left channel speaker terminal.
No sound from subwoofer. • Check that the subwoofer is connected properly, switched on and the volume
turned up.
• If your subwoofer has a sleep function, make sure it is switched off.
• Make sure that the Subwoofer setting is YES or PLUS (see Speaker Setting on
page 95).
• The crossover frequency may be set too low; try setting it higher to match the
characteristics of your other speakers (see Speaker Setting on page 95).
• If there is very little low frequency information in the source material, change
your speaker settings to Front: SMALL / Subwoofer: YES, or Front: LARGE /
Subwoofer: PLUS (see Speaker Setting on page 95).
• Check that the LFE channel is not set to OFF, or a very quiet setting (see
Setting the Audio options on page 64).
• Check the speaker level settings (see Channel Level on page 96).
No sound from one speaker. • Check the speaker connection (see Connecting the speakers on page 18).
• Check the speaker level settings (see Channel Level on page 96).
• Check that the speaker hasn’t been set to NO (see Speaker Setting on
page 95).
• The channel may not be recorded in the source. By using one of the advanced
effect listening mode, you may be able to create the missing channel (see
Listening in surround sound on page 53).
Sound is produced from
analog components, but not
from digital ones (DVD, LD,
CD-ROM, etc.).
• Check that the input signal type is set to DIGITAL (see Choosing the input
signal on page 58).
• Make sure that the digital input is assigned correctly for the input jack the
component is connected to (see The Input Setup menu on page 39).
• Check the digital output settings on the source component.
• If the source component has a digital volume control, make sure this is not
turned down.
• Make sure that the multichannel analog inputs are not selected. Select any
other input function.
No sound is output or a noise
is output when Dolby Digital/
DTS software is played back.
• Check that your DVD player is compatible with Dolby Digital/DTS discs.
• Check the digital output settings of your DVD player. Make sure that the DTS
signal output is set to On.
• If the source component has a digital volume control, make sure this is not
turned down.
No sound when using the
HOME MENU or STATUS
menu.
• If the HDMI input function is selected, sound is muted until exiting either
menu.
• If sound is muted in the sub zone (ZONE 2), it will be restored after exiting the
HOME MENU.
Symptom Remedy
VSX-1019_KU.book 104 ページ 2009年2月17日 火曜日 午前11時56分
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-1019AH-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-1019AH-K in the language / languages: English as an attachment in your email.

The manual is 9,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-1019AH-K

Pioneer VSX-1019AH-K User Manual - German - 127 pages

Pioneer VSX-1019AH-K User Manual - Dutch - 127 pages

Pioneer VSX-1019AH-K User Manual - French - 127 pages

Pioneer VSX-1019AH-K User Manual - Italian - 127 pages

Pioneer VSX-1019AH-K User Manual - Swedish - 251 pages

Pioneer VSX-1019AH-K User Manual - Spanish - 127 pages

Pioneer VSX-1019AH-K User Manual - Norwegian, Finnish - 251 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info