455217
58
Zoom out
Zoom in
Previous page
1/128
Next page
Listening to your system06
58
En
Selecting MCACC presets
Default setting: MEMORY 1
If you have calibrated your system for different
listening positions
1
, you can switch between
settings to suit the kind of source you’re
listening to and where you’re sitting (for
example, watching movies from a sofa, or
playing a video game close to the TV).
While listening to a source, press
, then press
MCACC
.
Press repeatedly to select one of the six
MCACC presets
2
or to switch calibration off.
See Data Management on page 91 to check
and manage your current settings.
Choosing the input signal
On this receiver, it is possible to switch the
input signals for the different inputs as
described below.
3
Press , then press
SIGNAL SEL
to select the input signal corresponding to
the source component.
Each press cycles through the options as
follows:
AUTO – The receiver selects the fir st
available signal in the following order:
HDMI; DIGITAL; ANALOG.
ANALOG – Selects an analog signal.
DIGITAL – Selects an optical or coaxial
digital signal.
HDMI – Selects an HDMI signal.
4
PCM – For PCM input signals.
5
The
receiver selects the first available signal in
the following order: HDMI; DIGITAL.
When set to DIGITAL or AUTO, the indicators
light according to the signal being decoded, as
follows:
2 DIGITAL lights with Dolby Digital
decoding.
2 DIGITAL PLUS lights with Dolby Digital
Plus decoding.
2 TrueHD lights with Dolby TrueHD
decoding.
DTS lights with DTS decoding.
DTS HD lights with DTS-HD decoding.
MSTR lights with DTS-HD Master Audio
decoding.
96/24 lights with DTS 96/24 decoding.
Note
1 Different presets might also have separate calibration settings for the same listening position, depending on how
you’re using your system. These presets can be set in Automatically setting up for surround sound (Auto MCACC) on
page 37 or Automatic MCACC (Expert) on page 78, either of which you should have already completed.
2 • These settings have no effect when headphones are connected.
• You can also press / to select the MCACC preset.
3 • This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz), DTS (including DTS 96/24) and WMA9 Pro
digital signal formats. The compatible signals via the HDMI terminals are: Dolby Digital, DTS, WMA9 Pro, PCM (32
kHz to 192 kHz), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio, SACD and DVD Audio
(including 192 kHz). With other digital signal formats, set to ANALOG (the MULTI CH IN and TUNER).
• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise,
ma
ke
the prop er digital connections (page 29) and set the signal input to DIGITAL.
• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your
DVD player.
RECEIVER
RECEIVER
4 When the HDMI option in Setting the Audio options on page 64 is set to THROUGH, the sound will be heard through
your TV, not from this receiver.
5 • This is useful if you find there is a slight delay before AUTO recognizes the PCM signal on a CD, for instance.
• When PCM is selected, noise may be output during playback of non-PCM sources. Please select another input
signal if this is a problem.
VSX-1019_KU.book 58 ページ 2009年2月17日 火曜日 午前11時56分
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-1019AH-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-1019AH-K in the language / languages: English as an attachment in your email.

The manual is 9,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-1019AH-K

Pioneer VSX-1019AH-K User Manual - German - 127 pages

Pioneer VSX-1019AH-K User Manual - Dutch - 127 pages

Pioneer VSX-1019AH-K User Manual - French - 127 pages

Pioneer VSX-1019AH-K User Manual - Italian - 127 pages

Pioneer VSX-1019AH-K User Manual - Swedish - 251 pages

Pioneer VSX-1019AH-K User Manual - Spanish - 127 pages

Pioneer VSX-1019AH-K User Manual - Norwegian, Finnish - 251 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info