455215
59
Zoom out
Zoom in
Previous page
1/100
Next page
Other connections
08
59
En
SP (off) – No sound is output from the speakers. The
same sound is output from the pre-out terminals
(including from your subwoofer, if connected) as
when selecting speaker system A (above).
Bi-amping your front speakers
Bi-amping is when you connect the high frequency driver
and low frequency driver of your speakers to different
amplifier (in this case, to both front and surround back
terminals) for better crossover performance. Your
speakers must be bi-ampable to do this (having separate
terminals for high and low) and the sound improvement
will depend on the kind of speakers you’re using.
1 Connect your speakers as shown below.
This illustration below shows the connections for bi-
amping your front left speaker. Hook up your front right
speaker in the same way.
Since both front and surround back speaker terminals
output the same audio, it doesn’t matter which set (front
or surround back) is powering which part (High or Low)
of the speaker.
Make sure that the + / connections are properly
inserted.
2 Select the ‘
Front Bi-Amp
’ setting from the
Surround Back System menu.
See Surround back speaker setting on page 41 to specify
how you’re using the surround back speaker terminals.
Caution
Most speakers with both High and Low terminals
have two metal plates that connect the High to the
Low terminals. These must be removed when you are
bi-amping the speakers or you could severely
damage the amplifier. See your speaker manual for
more information.
If your speakers have a removable crossover network,
make sure you do not remove it for bi-amping. Doing
so may damage your speakers.
Bi-wiring your speakers
The reasons for bi-wiring are basically the same as bi-
amping, but additionally, interference effects within the
wire could be reduced, producing better sound. Again, to
do this your speakers must be bi-wireable (that is they
must have separate terminals for the high and low
frequencies). When bi-wiring, make sure you’ve selected
Normal or Speaker B in Surround back speaker setting on
page 41.
To bi-wire a speaker, connect two speaker cords to
the speaker terminal on the receiver.
Using a banana plug for the second connection is
recommended.
Caution
Make sure you use a parallel (not series, which are
fairly uncommon) connection when bi-wiring your
speakers.
Don’t connect different speakers from the same
terminal in this way.
SPEAKERS
B
A
FRONT CENTER SURROUND SURROUND BACK /
RLRLR
L
(Single)
SELECTABLE SEE INSTRUCTION MANUAL
SELECTABLE
VOIR LE MODE D'EMPLOI
High
Low
Front left
speaker
VSX-1018AH_KU.book Page 59 Monday, March 10, 2008 4:51 PM
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-1018AH-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-1018AH-K in the language / languages: English as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-1018AH-K

Pioneer VSX-1018AH-K User Manual - English - 37 pages

Pioneer VSX-1018AH-K User Manual - German - 96 pages

Pioneer VSX-1018AH-K User Manual - German - 37 pages

Pioneer VSX-1018AH-K User Manual - Dutch - 37 pages

Pioneer VSX-1018AH-K User Manual - Dutch - 96 pages

Pioneer VSX-1018AH-K User Manual - French - 96 pages

Pioneer VSX-1018AH-K User Manual - French - 37 pages

Pioneer VSX-1018AH-K User Manual - Italian - 96 pages

Pioneer VSX-1018AH-K User Manual - Italian - 37 pages

Pioneer VSX-1018AH-K User Manual - Swedish - 186 pages

Pioneer VSX-1018AH-K User Manual - Spanish - 96 pages

Pioneer VSX-1018AH-K User Manual - Spanish - 37 pages

Pioneer VSX-1018AH-K User Manual - Norwegian - 186 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info