574076
56
Zoom out
Zoom in
Previous page
1/75
Next page
Other connections
10
56
En
Chapter 10:
Other connections
Caution
Before making or changing the connections
, switch off
the power and disconnect the power cord from the
power outlet. Plugging in components should be the
last connection you make with your system.
Be careful not to allow any contact between speaker
wires from different terminals.
You can use speakers with a nominal impedance
between 6–16
(please see
Switching the speaker
impedance
on page 70 if you plan to use speakers
with an impedance of less than 8
).
Second Zone speaker B setup
After selecting
Second Zone
in
Surround back speaker
setting
on page 38, you can use the speakers connected
to the (surround back) B speaker terminals on the rear
panel to listen to stereo playback in another room. See
Switching the speaker system
below for the listening
options with this setup.
1 Connect a pair of speakers to the surround back
speaker terminals on the rear panel.
Connect them the same way you connected your
speakers in
Connecting the speakers
on page 20. Make
sure to review
Hints on speaker placement
on page 21
when placing the speakers in another room.
2 Select ‘Second Zone’ from the ‘Surr Back System’
menu.
See
Surround back speaker setting
on page 38 to do this.
Switching the speaker system
If you selected
Second Zone
in
Surround back speaker
setting
on page 38, three speaker system settings are
possible using the
SPEAKERS
button. If you selected
Normal (SB)
or
Front Bi-Amp
, the button will simply
switch your main speaker system on or off. The options
below are for the
Second Zone
setting only.
Use the SPEAKERS button on the front panel to
select a speaker system setting.
As mentioned above, if you have selected
Normal (SB)
,
the button will simply switch your main speaker system
(A) on or off.
Press repeatedly to choose a speaker system option:
SP
A
– Sound is output from speaker system A and
the same signal is output from the pre-out terminals.
SP
B
– Sound is output from the two speakers
connected to speaker system B. Multichannel
sources will not be heard. The same signal is output
from the surround back channel pre-out terminals.
SP
AB
– Sound is output from speaker system A (up
to 5 channels, depending on the source), the two
speakers in speaker system B, and the subwoofer.
The sound from speaker system B will be the same as
the sound from speaker system A (multichannel
sources will be downmixed to 2 channels).
SP
(off) – No sound is output from the speakers. The
same sound is output from the pre-out terminals
(including from your subwoofer, if connected) as
when selecting speaker system A (above).
Note
The subwoofer output depends on the settings you
made in
Manual speaker setup
on page 43. However,
if
SP
B
is selected above, no sound is heard from the
subwoofer (the LFE channel is not downmixed).
Depending on the settings in
Surround back speaker
setting
on page 38 output from the surround back
pre-out terminals may change.
All speaker systems (except
Second Zone
connections) are switched off when headphones are
connected.
PHONES
TUNER
CONTROL
TUNER
EDIT
SYSTEM
SETUP
RETURN
INPUT
ATT
FL
DIMMER
MCACC
SETUP MIC
DIGITAL IN S
-
VIDEO VIDEO
VIDEO2 INPUT
AUDIOLR
MULTI JOG
TUNING/
STATION
BAND MPX TONE
ACOUSTIC
EQ
DIALOG
ENHANCEMENT
MULTI CH
IN
SIGNAL
SELECT
EXTENDED
MODE
SPEAKERS
MIDNIGHT/
LOUDNESS
MULTI
JOG
MULTI
JOG
VSX_1014.book.fm 56 ページ 2004年5月14日 金曜日 午前9時24分
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-1014TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-1014TX in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info