574062
77
Zoom out
Zoom in
Previous page
1/104
Next page
Other connections
09
77
En
2 Select the ‘Front Bi-Amp’ setting from the
Speaker Systems menu.
See Speaker Systems on page 52 to specify how you’re
using the surround back speaker terminals.
Note
For 7.1 surround sound with this configuration, you
must connect an additional amplifier to the surround
back channel pre-outs. See Connecting additional
amplifiers below for more on this.
Caution
Most speakers with both Hi and Low terminals have
two metal plates that connect the Hi to the Low
terminals. These must be removed when you are bi-
amping the speakers or you could severely damage
the amplifier. See your speaker manual for more
information.
If your speakers have a removable crossover network,
make sure you do not remove it for bi-amping. Doing
so may damage your speakers.
Bi-wiring your speakers
The reasons for bi-wiring are basically the same as bi-
amping, but additionally, interference effects within the
wire could be reduced, producing better sound. Again, to
do this your speakers must be bi-wireable (that is they
must have separate terminals for the high and low
frequencies). When bi-wiring, make sure you’ve selected
Normal Surround in Speaker Systems on page 52.
To bi-wire a speaker, connect two speaker cords
to each speaker terminal on the amplifier.
Caution
Make sure you use a parallel (not series, which are
fairly uncommon) connection when bi-wiring your
speakers.
Don't connect different speakers from the same
terminal in this way.
Adding a second set of surround
speakers for Bi-Surround
If your listening area is quite long, and you are seated far
from the front speakers, you may want to add an extra set
of left and right surround speakers instead of your
surround back speakers. These should be placed
between the front speakers and your existing surround
speakers (which should already be placed on either side
of your listening position).
1 Connect a second set of surround speakers as
shown below.
Connect the second surround left speaker to the
surround back left speaker terminal. Connect the second
surround right speaker in the same way.
Make sure that the + / connections are properly
inserted. (A and B speaker systems are opposite).
2 Select the ‘Bi-Surround’ setting from the Speaker
Systems menu.
See Speaker Systems on page 52 to specify how you’re
using the surround back speaker terminals.
Using the pre-outs
Connecting additional amplifiers
This amplifier has more than enough power for any home
use, but it’s possible to add additional amplifiers to every
channel of your system using the pre-outs. If you use
additional amps for the front channels take out the U-
shaped connectors (see item 8 in Rear panel on page 12).
Make the connections shown below to add amplifiers to
power your speakers.
FRONT
CENTER
SUR-
ROUND
SUR-
ROUND
BACK
(Single)
L
R
L
R
L
R
L
R
A
B
2nd surround
left speaker
2nd surround
right speaker
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSA-AX10i-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSA-AX10i-S in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSA-AX10i-S

Pioneer VSA-AX10i-S User Manual - English - 25 pages

Pioneer VSA-AX10i-S User Manual - German - 104 pages

Pioneer VSA-AX10i-S User Manual - Dutch - 104 pages

Pioneer VSA-AX10i-S User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info