574062

Pioneer VSA-AX10i-S Manual

55
Zoom out
Zoom in
Previous page
1/104
Next page
The Surround Setup menu
06
55
En
Speaker Distance
For good sound depth and separation from your system,
you need to specify the distance of your speakers from
the listening position. The amplifier can then add the
proper delay needed for effective surround sound.
1 Select ‘Speaker Distance’ then press ENTER.
2 Select a setup option and press ENTER.
• Manual – Select each speaker in turn and adjust the
distance manually.
• Auto – The speaker distances are set automatically
by the amplifier as it outputs test tones. (For this
setup you must have the mic connected.)
3 If you selected ‘Auto’, select ‘Start’ and press
ENTER. If you selected ‘Manual’, adjust the distance
of each speaker using the / (cursor left/right)
hard keys.
Using the Manual setup, you can adjust the distance of
each speaker in 0.05 meter increments.
With the Auto setup, !! Complete !! is displayed on-
screen after the speaker distances are set. If you want to
check the settings, select Check and press ENTER.
4 Select ‘Return’ then press ENTER to finish.
Tip
• For best surround sound, make sure the surround
back speakers are the same distance.
Acoustic Calibration EQ
Acoustic Calibration Equalization is a kind of room
equalizer for your speakers (excluding the subwoofer). It
works by measuring the acoustic characteristics of your
room and neutralizing the ambient characteristics that
can color the original source material. You can also make
these settings manually to get a frequency balance that
suits your tastes. A more advanced setup is also
available, where you can make detailed settings
according to your room’s reverb characteristics (see
Professional Acoustic Calibration EQ on page 57). You
should have the mic connected when using any of the
setup options.
Setting the Acoustic Calibration EQ automatically
1 Select ‘Acoustic Cal EQ’ then press ENTER.
2 Select ‘Auto’ then press ENTER.
As the amplifier outputs test tones, the frequency
balance is adjusted automatically for the following
settings:
• ALL CH ADJ – All the speakers are set individually so
no special weighting is given to any one channel.
• FRONT CH ALIGN – All speakers are set in
accordance with the front speaker settings.
!! Complete !! is displayed on-screen after the acoustic
calibration equalization is set. If you want to check the
settings, select Check and press ENTER.
3 Select ‘Return’ then press ENTER to finish.
Setting the Acoustic Calibration EQ manually
Before manually adjusting the Acoustic Calibration EQ,
we recommend copying the ALL CH ADJ or the FRONT
CH ALIGN settings from the Auto setup above (or from
Introduction to home theater on page 35) to one of the
custom settings. Instead of just a flat EQ curve, this will
give you a reference point from which to start (see
Copying your Acoustic Calibration EQ settings below for
how to do this).
1 Select ‘Acoustic Cal EQ’ then press ENTER.
2.Surround Setup
[ Check ]
[ 1.Speaker Systems ]
[ 2.Channel Level ]
[ 3.Speaker Distance ]
[ 4.Acoustic Cal EQ ]
[ 5.X-Curve ]
[Return]
2.3. Speaker Distance
[Manual]
[Auto]
[Return]
Your Speaker Systems
Normal Surround ”
2.Surround Setup
[ Check ]
[ 1.Speaker Systems ]
[ 2.Channel Level ]
[ 3.Speaker Distance ]
[ 4.Acoustic Cal EQ ]
[ 5.X-Curve ]
[Return]
2. 4. Acoustic Cal EQ
[Data Copy]
[Manual]
CUSTOM1 , CUSTOM2
[Auto]
ALL ADJ & FRONT ALIGN
[Professional]
[Return]
2.Surround Setup
[ Check ]
[ 1.Speaker Systems ]
[ 2.Channel Level ]
[ 3.Speaker Distance ]
[ 4.Acoustic Cal EQ ]
[ 5.X-Curve ]
[Return]
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSA-AX10i-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSA-AX10i-S in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSA-AX10i-S

Pioneer VSA-AX10i-S User Manual - English - 25 pages

Pioneer VSA-AX10i-S User Manual - German - 104 pages

Pioneer VSA-AX10i-S User Manual - Dutch - 104 pages

Pioneer VSA-AX10i-S User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info