811514
11
Zoom out
Zoom in
Previous page
1/240
Next page
11
English
Before Installing the Product
WARNING
When installing the product on vehicles installed with an air bag, never install on the cover of the air
bag and at locations that might obstruct the deployment of the air bag. Doing so might prevent the air
bag from being deployed normally, cause the product to fly out due to air bag deployment, and cause
accident and injury.
CAUTION
First check with the vehicle manufacturer for precautions related to the installation work when installing
the product in a vehicle equipped with airbags. Otherwise there is a risk of airbag malfunction.
Always use the included parts as specified. There is a risk of product failure if other parts are used.
Install this product in a location where it will not hinder vehicle equipment and the ability to drive the
vehicle.
Installation Precautions
The main unit is for installation to the inside of the front window only. Do not install it anywhere else
inside or outside of the vehicle.
When installing the main unit to the inside of the front windscreen, be sure to install it to the specified
positions of the front windscreen and within the specified dimensions.
Make sure that the surface of the front windscreen is clean and dry, before attaching the mounting
cradle.
Depending on the vehicle, installation at the specified location and within the specified dimensions
may not be possible. For details, consult with your dealer.
Do not cover the main unit or get the lens dirty.
Do not place reflective objects near the lens.
Take care when handling the main unit that it does not drop and you do not touch the lens.
Recording quality may be affected if the front windscreen of the vehicle is coated or has been specially
treated.
Choose a working location free from dust and debris in the air.
When the temperature is low or there is condensation on the glass, turn on the heater and defroster to
warm up the window in order to prevent poor adhesion of the mounting cradle.
To avoid the windscreen mounted cradle from detaching, you may attach the safety strap (included
in the box).
Always install this product in the specified installation position to ensure a safe field of view while
driving and to achieve full performance from the product.
Pioneer is not liable for any damage, due to installation or use of the product.
Installation Tips
Before Installing and Securing the Product
First, temporarily connect this product and confirm that it operates correctly, and then install it. If the
product does not operate correctly, check again if there is a mistake in the connection.
Before Applying Mounting Cradle
Clean the location where the mounting cradle will be applied.
CAUTION
Install firmly so that it does not come off. Incorrect installation may cause this to detach whilst driving
and cause an accident. Inspect the installation state from time to time.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VREC130RS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VREC130RS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info