528333
15
Zoom out
Zoom in
Previous page
1/92
Next page
English Français Español
Italiano
Deutsch
Nederlands
Pyccкий
9
En
•If the transmitters power is turned OFF or enters STANDBY mode while the
speaker’s power is still ON, the speaker may emit a rather loud burst of noise.
To avoid such noise, always turn the speaker power OFF after use.
•If you are not going to use the system for a long time, unplug the AC power
adaptor from outlet. When removing the plug, grip the AC power adaptor. Do
not pull on the cord.
When the V
OICE BOOST switch (on the top of the speakers) is pressed, audio
frequencies in the range of the human voice are emphasized, thus providing
compensation to make the signals easier to hear. When the VOICE BOOST
function is enabled, the LED above the VOICE BOOST switch lights green. If the
VOICE BOOST switch is pressed again, the VOICE BOOST function will be
canceled.
The transmitter has two freq
uency channels. Select the channel that provides the
best reception for the conditions in your area.
1 First, turn OFF speaker power.
2 Slide the transmission frequency select switch on the back side of the
transmitter to choose either CH1 or CH2; in this way the transmission
frequency will be changed.
3 Turn speaker power ON again. Sound will be produced in sync to the
transmitter’s frequency.
•If the transmitters channel is changed without first turning off the speaker
power, immediately press the spe
akers TUNED sw itch. Sound will be
produced from the speaker in synch with the transmitters frequency.
The transmission distance is affected by the surrounding environment. If you
hear noise or intermittent sound, either move the speaker to a location with
better reception, or change the transmission channel.
If the LED above the TUNED switch is not illuminated (no sound is produced), or
if a burst of noise is heard from the speaker, it generally means the sig
nal from
the transmitter has not been received correctly by the speaker. In this event,
press the TUNED switch in order to sync the speaker to the transmitter’s
frequency.
3-2 Voice boost
3-3 Changing the transmission frequency
3-4 TUNED switch
Note
Note
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VMS-550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VMS-550 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info