699669
34
Zoom out
Zoom in
Previous page
1/64
Next page
05
34
En
Chapter 5
Playback from Source function
About Source
function
This player’s Source function allows you to display
a list of input sources and start playback. This
chapter describes setup and playback procedures
required to enjoy these features. When you play
the files stored on your computer or the
components on the network, it is advisory that you
also refer to the operation manual supplied with
your network component.
The input sources that can be played from Source
function are as shown below.
BD-R/RE (BDAV format) discs
DVD-R/RW (VR format) discs
Audio CDs (CD-DA, SACD and DTS CDs)
DVD/CDs on which only data files of video,
image or audio files, etc. are recorded.
•USB device
Files on the network servers (on the PCs or
components connected to the player via LAN
interface.)
Note
•The Source function allows you to play files on
media servers connected on an identical Local
Area Network (LAN) as the receiver.
The following files are allowed to be played
from Source function:
PCs running Microsoft Windows 10 with
Windows Media Player 12 installed
DLNA-compatible digital media servers (on
PCs or other components)
Files stored in a PC or DMS (Digital Media
Server) as described above can be played by
Digital Media Player (DMP). The player
supports the use of such DMP.
Files stored in a PC or DMS (Digital Media
Server) as described above can be played via
command from an external Digital Media
Controller (DMC). Devices controlled by this
DMC to play files are called DMRs (Digital
Media Renderers). This player supports this
DMR function. When in the DMR mode, such
operations as playing and stopping files can be
performed from the external controller.
To play back audio files stored on components
on the network, you must turn on the DHCP
server function of your router. In case your
router does not have the built-in DHCP server
function, it is necessary to set up the network
manually. Otherwise, you cannot play back files
stored on components on the network. See 
Setting the IP address on page 44
About network playback
The network playback function of this unit uses the
following technologies:
Windows Media Player
See Windows Media Player 12 above for more on
this.
Content playable over a network
Even when encoded in a compatible format,
some files may not play correctly.
Some functions may not be supported
depending on the server type or version used.
Supported file formats vary by server. As such,
files not supported by your server are not
displayed on this unit. For more information
check with the manufacturer of your server.
Disclaimer for Third Party Content
Access to content provided by third parties
requires a high speed Internet connection and may
also require account registration and a paid
subscription.
Third party content services may be changed,
suspended, interrupted, or discontinued at any
time without notice, and Pioneer disclaims any
liability in connection with such occurrences.
Pioneer does not represent or warrant that
content services will continue to be provided or
available for a particular period of time, and any
such warranty, express or implied, is disclaimed.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer UDP-LX800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer UDP-LX800 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer UDP-LX800

Pioneer UDP-LX800 User Manual - German, Dutch - 184 pages

Pioneer UDP-LX800 User Manual - French, Italian - 184 pages

Pioneer UDP-LX800 User Manual - Swedish - 184 pages

Pioneer UDP-LX800 User Manual - Spanish - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info