699669
29
Zoom out
Zoom in
Previous page
1/64
Next page
29
En
04
Switching the subtitles
For discs or files on which multiple subtitles are
recorded, the subtitles can be switched during
playback.
Caution
The subtitles cannot be switched for discs
recorded by a DVD or BD recorder. Also refer
to the operating instructions for the device
used for recording.
During playback, press SUBTITLE.
The current subtitle and total number of
recorded subtitles are displayed on the TV
screen.
To switch the subtitle, press SUBTITLE again.
The subtitles can also be switched by selecting
Subtitle from the FUNCTION menu.
If the subtitles are not switched when
SUBTITLE is pressed, switch them from the disc
menu screen.
Turning the subtitles off
Press SUBTITLE several times or select Subtitle
from the FUNCTION menu to switch the setting to
Off.
Using the DIRECT/
TRANSPORT function
When the DIRECT function is turned on, the digital
audio output and video output are blocked and
analog audio is played back with high quality. This
function is turned Off upon shipping.
Also, turning the TRANSPORT function to on will
block the analog audio output and the circuit, and
play back digital video and digital audio with high
quality.
Press DIRECT.
The current status is displayed on the player’s
front panel display. To switch the function,
press DIRECT again.
[OFF] [DIRECT] [TRANSPORT] (back to
beginning)
Turning on the DIRECT function and the
TRANSPORT function will light up the DIRECT
indicator and TRANSPORT indicator of the
main unit respectively.
Note
When you turn on the DIRECT/TRANSPORT
function and play, the output volume may be
low depending on the settings of this device
and contents being played.
Depending on disk or file, DIRECT/
TRANSPORT function will not work in some
cases if playback is not stopped (resume
playback function is in cancelled state). To
cancel the resume playback function, press g
while playback is stopped.
Moving subtitles
The position of the subtitles displayed while
playing BD-ROMs or DVDs can be moved.
1 Play the BD-ROM or DVD video and display the
subtitles on the TV screen.
2 Press and hold the SUBTITLE button for at least
2 seconds.
The Subtitle shift mode is set.
[Subtitle shift mode] is displayed on the TV
screen.
3 Use the / buttons to move the position of the
subtitles.
Use the / buttons to move the position of
the subtitles.
Once the setting is complete, press ENTER.
4 Cancel the Subtitle shift mode.
Press the ENTER button.
Switching the audio
For discs or files on which multiple audio streams/
channels are recorded, audio streams/channels
can be switched during playback.
During playback, press AUDIO.
The current audio and total number of
recorded audio streams are displayed on the
TV screen.
To switch the audio, press AUDIO again.
The audio can also be switched by selecting
Audio from the FUNCTION menu.
If the audio is not switched when AUDIO is
pressed, switch it from the disc menu screen.
Switching the CD/SACD
playback area
1 In the stop mode, press CD/SACD.
The current playback area setting is displayed
on the player’s front panel display. To switch
the playback area, press CD/SACD again.
[CD AREA] [SACD 2CH] [SACD MCH]
(back to beginning)
During playback, press g twice to cancel
continuous play before selecting the playback
area.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer UDP-LX800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer UDP-LX800 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer UDP-LX800

Pioneer UDP-LX800 User Manual - German, Dutch - 184 pages

Pioneer UDP-LX800 User Manual - French, Italian - 184 pages

Pioneer UDP-LX800 User Manual - Swedish - 184 pages

Pioneer UDP-LX800 User Manual - Spanish - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info