791723
30
Zoom out
Zoom in
Previous page
1/156
Next page
Surround sound settings
05
30
En
Dynamic Range Control
1
When watching Dolby Digital or DTS material at low
volume, low level sounds—including some of the
dialog—can be difficult to hear properly. Using one of the
Dynamic Range Control (DRC) settings can help by
bringing up the low level sounds, while controlling high
level peaks.
1Press SHIFT+SYSTEM SETUP.
2Hold SHIFT and use the
/
buttons to select
DRC.
3Use SHIFT +
/
to select a setting.
Select one of the following:
DRC OFF
(default)
– No dynamic range adjustment
(use when listening at higher volume)
DRC MID
– Mid setting
DRC HIGH
– Dynamic range is reduced (loud sounds
are reduced in volume while quieter sounds are
increased)
4Press SHIFT+ENTER to exit.
Dual mono setting
2
Specifies how dual mono encoded Dolby Digital or DTS
soundtracks should be played. You can also use this
setting to switch the audio channel on DVD-RW discs
recorded with bilingual audio.
1Press SHIFT+SYSTEM SETUP.
2Hold SHIFT and use the
/
buttons to select
DRC.
3Use SHIFT +
/
to select a setting.
Select one of the following:
CH1 MONO
(default)
– Only channel 1 is played
CH2 MONO
– Only channel 2 is played
CH1/CH2
– Both channels are played through the
front speakers
4Press SHIFT+ENTER to exit.
Adjusting the channel levels using
the test tone
If you prefer, you can set the channel levels using a test
tone as a reference, rather than playing a source (see
Channel level setting
on page 29). A test tone is played
through each speaker in turn, allowing you to adjust the
level as it plays.
Note that the channel level settings for stereo sources
are independent of the settings for surround sound
sources.
1 Press SHIFT+SURROUND to select the Auto
listening mode.
If you want to set the channel levels for stereo (two
channel) playback, select the
STEREO
listening
mode.
2Press SHIFT+TEST TONE.
The test tone is output from each speaker in turn.
3 While a test tone is playing, hold SHIFT and use
the
/
buttons to adjust that channel level.
The aim is to adjust the levels so that you hear the test
tone at the same volume from each speaker. You can
adjust the level of each channel by ± 10 dB.
You can adjust the overall volume of test tone output
using the
VOLUME
+/– buttons (this does not affect
the channel level settings).
Because of the ultra low frequencies the subwoofer
produces, it may sound quieter than it really is. We
suggest adjusting the subwoofer level using the
method described in
Channel level setting
on
page 29.
4 When you’re done, press SHIFT+ENTER to exit
test tone setup.
If you use the Room Setup feature again, it will
overwrite the settings you have made here.
Note
1A similar adjustment feature is available on the DVD recorder—see
Audio DRC
on page 129.
2A similar adjustment feature is available on the DVD recorder—see
Switching audio channels
on page 99.
SX-SW77.book Page 30 Wednesday, April 27, 2005 6:05 PM
Downloaded from www.Manualslib.com manuals search engine
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SX-SW77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SX-SW77 in the language / languages: English as an attachment in your email.

The manual is 7.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SX-SW77

Pioneer SX-SW77 User Manual - Dutch - 156 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info