651678
35
Zoom out
Zoom in
Previous page
1/48
Next page
Various settings
35
It
De
Signal:
The signal strength of the connected access
point will be displayed.
Status:
The status of the connected access point will be
displayed.
MAC Address:
View this unit’s MAC address.
DHCP:
Enable
(default setting)
Disable
IP Address:
View/set the IP address.
Subnet Mask:
View/set the subnet mask.
Gateway:
View/set the default gateway.
DNS Server:
View/set the DNS server address.
Proxy URL:
Set the proxy server address.
Proxy Port:
Set the proxy port number.
0
This only appears when Proxy URL has been set.
Friendly Name:
Change the name for this unit to a
simple one for display on the equipment connected by
network. Press the ENTER button and input 31 or less
characters.
0
For information on how to input characters, see
“Inputting characters” (
>
33).
AirPlay PW:
You can enter a password so that only the
entered user can use AirPlay. Press the ENTER button
and input 31 or less characters.
0
For information on how to input characters, see
“Inputting characters” (
>
33).
Network Check:
You can check the network connection.
Press the ENTER button when “Start” is displayed.
6. Bluetooth
Make the
Bluetooth
setting.
0
If it is not displayed, wait for a moment until the
network feature starts.
Bluetooth:
Select whether or not to use the
Bluetooth
function.
On
(default setting)
Off
0
Select “On” when making following
Bluetooth
settings.
Auto In Change:
The input of the unit will automatically
be switched to “BLUETOOTH” when connection is made
from a
Bluetooth
enabled device to the unit.
On
(default setting)
Off
0
If the input is not switched automatically, set to “Off”
and change the input manually.
Auto Reconnect:
This function automatically reconnects
to the
Bluetooth
enabled device connected last when you
change the input selector to “BLUETOOTH”.
On
(default setting)
Off
0
This may not work with some
Bluetooth
enabled
devices.
Pairing Info:
The information of the previous pairing
stored in this unit will be initialized. Pressing the ENTER
button when “Clear” is displayed initializes the pairing
information stored in this unit.
0
This function does not initialize the pairing information
on the
Bluetooth
enabled device. When pairing the unit
again with the device, be sure to clear the pairing
information on the
Bluetooth
enabled device in
advance. For information on how to clear the pairing
information, refer to the
Bluetooth
enabled device’s
instruction manual.
Device:
Displays the name of the
Bluetooth
enabled
device connected to the unit.
0
The name is not displayed when “Status” is “Ready” or
“Pairing”.
Status:
Displays the status of the
Bluetooth
enabled
device connected to the unit.
Ready
: Not paired
Pairing
: Pairing
Connected
: Successfully connected
7. Firmware Update
Make the firmware update setting.
0
If it is not displayed, wait for a moment until the
network feature starts.
Update Notice:
Availability of a firmware update will be
notified via network.
Enable
(default setting)
Disable
Version:
The current firmware version will be displayed.
Update via NET:
Press the ENTER button to select when
you want to update the firmware via network.
0
You will not be able to select this setting if you do not
have Internet access or there is nothing to update.
Update via USB:
Press the ENTER button to select
when you want to update the firmware via USB.
0
You will not be able to select this setting if a USB
storage device is not connected or there is nothing to
update in the USB storage device.
8. Lock
SetupParameter:
The Setup menu will be locked to
protect the settings.
Locked
Unlocked
(default setting)
SX-N30_mst.book 35 ページ 2015年11月2日 月曜日 午後12時55分
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SX-N30DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SX-N30DAB in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SX-N30DAB

Pioneer SX-N30DAB User Manual - German - 88 pages

Pioneer SX-N30DAB User Manual - Dutch - 88 pages

Pioneer SX-N30DAB User Manual - French - 88 pages

Pioneer SX-N30DAB User Manual - Italian - 88 pages

Pioneer SX-N30DAB User Manual - Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info