626471
16
Zoom out
Zoom in
Previous page
1/52
Next page
Surround sound setup
04
16
En
Chapter 04:
Surround sound setup
Introduction to home theater
You are probably used to using stereo equipment to listen
to music, but may not be used to home theater systems
that give you many more options (such as surround
sound) when listening to soundtracks.
Home theater refers to the use of multiple audio tracks to
create a surround sound effect, making you feel like
you're in the middle of the action or concert. The
surround sound you get from a home theater system
depends not only on the speakers you have set up in your
room, but also on the source and the sound settings of
the receiver.
DVD-Video has become the basic source material for
home theater due to its size, quality, and ease of use.
Depending on the DVD, you can have up to seven
different audio tracks coming from one disc, all of them
being sent to different speakers in your system. This is
what creates a surround sound effect and gives you the
feeling of ‘being there’.
This receiver will automatically decode Dolby Digital,
DTS, or Dolby Surround DVD-Video discs, according to
your speaker setup. In most cases, you won’t have to
make changes for realistic surround sound, but other
possibilities (like listening to a CD with multichannel
surround sound) are explained in
Listening to your
system
on page 19.
Switching on
Use the
STANDBY/ON
button on the front panel or the
remote control to switch the receiver on or into standby.
Remember that when the receiver is in standby it still
uses a small amount of power (0.45 W). Unplug from the
wall outlet to completely disconnect the power. The
receiver will retain its settings for about four weeks when
unplugged.
Quick setup using the Room Setup
The Room Setup feature gives you a very simple way to
set up your receiver for good surround sound by setting
the room size and your seating position in the room.
You can make more detailed settings for surround sound
later if you want, setting individual channel levels and
speaker distances. See below for more details.
1 If the receiver isn’t already on, press
STANDBY/ON (remote or front panel) to switch on.
2 Press ROOM SETUP then ENTER.
The display shows the current Room Setup setting.
If any of the speaker distance settings have been
changed (see
Setting speaker distances
below) then
the display blinks
ROOM SET
.
3 Use the ROOM SETUP button to select a room
size setting, then press ENTER
.
Select from:
Room S
– Smaller than average room (approx. 3.5 x
4.5m)
Room M
– Average room (approx. 5.5 x 6.0m)
RECEIVER
ROOM
SETUP
STANDBY/ON
ENTER
SX-315.book 16 ページ 2004年11月8日 月曜日 午前11時2分
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SX-315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SX-315 in the language / languages: English, French as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info