611807

Pioneer SX-20DAB Manual

10
Zoom out
Zoom in
Previous page
1/16
Next page
04 Operation
10
En
Listening to the FM radio
The following steps show you how to tune in to FM radio
broadcasts using the automatic (search) and manual
(step) tuning functions. Once you are tuned to a station
you can memorize the frequency for recall later—see
Saving station presets below for more on how to do this.
1 Press
FM/DAB
repeatedly to select the
FM band.
2 Tune to a station.
• There are three ways to do this:
Automatic tuning
To search for stations in the currently selected band,
press and hold / for about 0.5 second. The receiver
will start searching for the next station, stopping when it
has found one. Repeat to search for other stations.
Manual tuning
To change the frequency one step at a time, press /.
High speed tuning
Press and hold / for high speed tuning.
– Lights when a normal broadcast channel.
– Lights when a stereo FM broadcast is being
received in auto stereo mode.
Note
• You can also use the front panel controls. Press
TUNE/PRESET to enter tuning mode, then use /
– or +/ to change the frequency.
Improving FM sound
If the or indicator does not light when tuning to an
FM station because the signal is weak, set the stereo
receiver to the mono reception mode.
• This should improve the sound quality and allow you
to enjoy the broadcast.
1 Press
FM MODE
to select “
FM MONO
”.
Saving station presets
If you often listen to a particular radio station, it’s
convenient to have the receiver store the frequency for
easy recall whenever you want to listen to that station.
This saves the effort of manually tuning in each time.
This unit can memorize up to 30 stations.
• Stations are stored in stereo.
1 Tune to a station you want to memorize.
See Listening to the FM radio above for more on this.
2 Press
MEMORY
.
Station preset display is blinking.
VOLUME
ENTER
SCAN
RETURNFM/DAB
TOP
MENU
T
U
N
E
T
U
N
E
P
R
E
S
E
T
P
R
E
S
E
T
1
2
VOLUME
ENTER
SCAN
RETURNFM/DAB
FM MODE BALANCE
MEMORY
TOP
MENU
T
U
N
E
T
U
N
E
P
R
E
S
E
T
P
R
E
S
E
T
LR
2,4
VOLUME
ENTER
SCAN
RETURNFM/DAB
FM MODE BALANCE
MEMORY
TOP
MENU
T
U
N
E
T
U
N
E
P
R
E
S
E
T
P
R
E
S
E
T
LR
3
3 Within 5 seconds, press
/
to select
the station preset you want.
You can also use the numeric buttons.
Examples:
For “2” : Press “2”.
For “17” : Press “1”, then press “7” within 2 seconds.
For “30” : Press “0”.
• A stored frequency is erased from the memory by
storing another frequency in its place.
• If station preset display stop blinking, start again
from the above step 2.
4 Press
MEMORY
.
Station preset display stop blinking and the receiver
stores the station.
Listening to station presets
You will need to have some presets stored to do this. See
Saving station presets above if you haven’t done this
already.
1 Press
/
to select the station preset
you want.
• You can also use the numeric buttons on the
remote control to recall the station preset.
Note
• You can also use the front panel controls. Press
TUNE/PRESET to enter preset mode, then use /–
or +/ to select a preset station.
Scanning preset stations in sequence
1Press
SCAN
.
The receiver will start scanning the stations in the preset
sequence.
• At the desired station, press this button again to
stop scanning.
VOLUME
ENTER
SCAN
RETURNFM/DAB
TOP
MENU
T
U
N
E
T
U
N
E
P
R
E
S
E
T
P
R
E
S
E
T
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SX-20DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SX-20DAB in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SX-20DAB

Pioneer SX-20DAB User Manual - German - 16 pages

Pioneer SX-20DAB User Manual - Dutch - 16 pages

Pioneer SX-20DAB User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info