Getting Started
Installing and Removing the Batteries/
Switching Modes
You must install the batteries before using the product.
You can change the sensor modes after installing the batteries.
The product can be used as the ANT+ Power meter with the cyclocomputers of other •
companies (power meter mode).
To use the product in power meter mode, insert the battery in the right-side part rst,
and then the left-side part.
1.
Loosen the screws on the
transmitter and remove its
cover.
Use a philips screwdriver to loosen the
screw and remove the cover.
Be careful not to lose the removed •
screw.
Right transmitter (screws: 3 x)•
Left transmitter (screws: 4 x)•
2.
Remove the old battery.
Right transmitter•