611821
3
Zoom out
Zoom in
Previous page
1/20
Next page
Easy Installation Power Meter Cranksets
SGY-PM90 and SGY-PM68 with Non-Pioneer ANT+ Cycle Computer
1.) Magnet Placement
Measuring from the center of the bottom bracket out,
temporarily tape the magnet so that the center line of the
magnet is:
Right Drive Side - 42mm
Left Side - 53mm
Use the supplied Magnet Placement Template to help locate
the optimum locations for magnet placement on the frame.
Position the magnets so the sensor line and magnet center
line are parallel when the sensor passes over.
Center hole on bottom bracket and use supplied
double sided tape to temporarily secure while locating
optimum magnet location
Sensor Line:
Magnet
Center
Line:
Magnet Range
1.5mm 10.7mm
Magnet Template
card
2.) Confirm Magnet Placement
Remove and replace both Left and Right batteries. Orange light will appear for 10 seconds.
Rotate the crank slowly (30rpm). Check that the LED on each sensor lights green once for each
revolution.
Once confirmed, secure magnets for final placement.
If no Green LED,
check and adjust
magnet placement
LED’s light green
3.) Pair to your ANT+ Computer
Spin the crank 3 4 rotations to activate the Power Meter
See your ANT+ Cycle Computer
Instructions for Power Meter Pairing and
Zero Calibration procedures.
ID 12345
Sensor ID
Left Sensor Arm
For additional Installation Instructions visit the following on-line support
locations
www.pioneerelectronics.com/PUSA/Cycle+Sports/Products/Power+Meters
www.Youtube/Pioneer Cycle Sports USA
Please refer to the owners manual for detailed installation instructions.
Visit https://cyclo-sphere.com/ for the latest firmware and updates.
Customer Support 1-800-421-1624
E-Mail: cycle-sports@pioneer-usa.com
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SGY-PM68 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SGY-PM68 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info