699654
216
Zoom out
Zoom in
Previous page
1/225
Next page
216
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Wireless LAN Network
Unplug and plug the power cords of this unit and the wireless LAN router, check the power-on status of the wireless LAN router, or restart the
wireless LAN router.
Check the following if the problem persists after you have conrmed the above.
Cannot access wireless LAN network
The wireless LAN router setting may be switched to Manual. Restore the setting to Auto.
Try the manual set-up. The connection may succeed.
When the wireless LAN router is in stealth mode (mode to hide SSID) or when the ANY connection is off, the SSID is not displayed. Change the
setting and try again.
Check if the SSID and encryption settings (WEP, etc.) are correct. Match the network settings with the settings of this unit.
Connection to an SSID that includes multi-byte characters is not supported. Set the SSID of the wireless LAN router using single-byte
alphanumeric characters only, and try again.
Connected to an SSID different from the selected SSID
Some wireless LAN routers allow you to set multiple SSIDs for one unit. If connecting to such a router using the automatic setting button, you may
end up connecting to an SSID different from the SSID you want to connect to. If this occurs, use the connection method requiring you to enter a
password.
Playback sound is interrupted, or communication is not possible
You may not receive radio waves due to poor radio wave conditions. Shorten the distance from the wireless LAN router, or remove obstacles to
improve visibility, and connect again. Install the unit away from microwave ovens or other access points. It is recommended to install the wireless
LAN router and the unit in the same room.
If there is a metallic object near the unit, wireless LAN connection may not be possible because the metal affects the radio wave.
When other wireless LAN devices are used near the unit, other symptoms may occur, such as interrupted playback and impossible
communication. You can avoid those problems by changing the channel of your wireless LAN router. For instructions on changing channels, refer
to the instruction manual supplied with your wireless LAN router.
There may not be enough bandwidth available in wireless LAN. Use a wired LAN for connection.
ZONE B function
Cannot output audio to ZONE B
To output audio to ZONE B, the audio output destination at "Audio" - "Zone B" under AV Adjust must be set to "On(A+B)" or "On(B)", and "System
Setup" - "Speaker" - "Conguration" - "Zone 2 Preout" on the Home screen must be set to "Zone B".
( p126)
216


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SC-LX904 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-LX904 in the language / languages: English as an attachment in your email.

The manual is 17,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-LX904

Pioneer SC-LX904 Quick start guide - English, German - 2 pages

Pioneer SC-LX904 User Manual - German - 225 pages

Pioneer SC-LX904 Quick start guide - Dutch - 2 pages

Pioneer SC-LX904 User Manual - Dutch - 225 pages

Pioneer SC-LX904 Quick start guide - French - 2 pages

Pioneer SC-LX904 User Manual - French - 225 pages

Pioneer SC-LX904 Quick start guide - Italian - 2 pages

Pioneer SC-LX904 User Manual - Italian - 225 pages

Pioneer SC-LX904 Quick start guide - Swedish - 2 pages

Pioneer SC-LX904 User Manual - Swedish - 225 pages

Pioneer SC-LX904 Quick start guide - Spanish - 2 pages

Pioneer SC-LX904 User Manual - Spanish - 225 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info