699654
203
Zoom out
Zoom in
Previous page
1/225
Next page
203
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
1. Speaker Setup
1. Select the connected speaker conguration, and press ENTER.
Note that the image on the screen changes each time you select the number
of channels in "Speaker Channels".
Speaker Setup
Height 1 Speaker
Height 2 Speaker
Top Front
Top Rear
2 ch
Speaker B
Zone 2 Preout
Zone 2
7.1.4 ch
Zone Speaker
Set the items on the second page with the cursor buttons / . Here you
can save the measurement results for each speaker measured in "2.Full Auto
MCACC" in the following 3 calibration types. Use / to select the memory
location you want to save the results of the measurement to by item. If multiple
calibration types are selected, you can select the calibration type to use in "AV
Adjust" - "MCACC" - "MCACC Memory". Note that you cannot select the same
save destination for different calibration types.
Symmetry (default value: M1.Memory 1): Calibration that emphasizes phase
characteristics
All Channel Adjust (default value: ---): Calibration that emphasizes
frequency characteristics
Front Align (default value: ---): Calibration that emphasizes front speaker
characteristics
Press ENTER when you have nished the settings.
Speaker Setup
Front Align
All Channel Adjust
Symmetry
Select where the data is to be stored.
Calibrates with emphasis on phase characteriscs.
---
---
M1.Memory 1
2. The speaker combination selected in step 1 is displayed. "Yes" is displayed for
the selected speakers. If the setting is correct, press ENTER.
3. Select "Next" and press ENTER. Then a test tone is output from each speaker
to conrm the connection. Selecting each speaker with the cursors / will
output the test tone. Press ENTER after conrmation.
4. If there is no problem with the speaker connection, select "Next" and press
ENTER. To return to "Speaker Setup", select "Back to Speaker Setup" and
press ENTER.
2. Full Auto MCACC
Place the supplied speaker setup microphone in the listening position, measure
the test tones emitted by the speakers, then the unit automatically sets the
optimum volume level for each speaker, the crossover frequencies, and the
distance from the listening position. The inuence of standing waves can be
reduced to suit the listening environment, the reverberation characteristics can be
measured to increase the precision of calibration, the speaker equalizers can be
adjusted, and the difference in phase and timing between speakers and speaker
units can be corrected. These settings and calibrations can be readjusted with
Manual MCACC, and you can enable or disable them in AV Adjust.
It takes between 3 and 12 minutes for calibration to be completed. Each
speaker outputs the test tone at high volume during measurement, so be
careful of your surroundings. Also, keep the room as quiet as possible during
measurement.
If you connect a subwoofer, check the power and volume of the subwoofer.
Set the subwoofer volume to more than half.
If the power of this unit suddenly turns off, the wires in the speaker cables
have touched the rear panel or other wires, and the protection circuit is
working. Twist the wires again securely, and make sure they do not stick out of
the speaker terminals when connecting.
1. Place the supplied speaker setup microphone at the listening position, and
connect it to the SETUP MIC jack on the main unit.
203


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SC-LX904 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-LX904 in the language / languages: English as an attachment in your email.

The manual is 17,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-LX904

Pioneer SC-LX904 Quick start guide - English, German - 2 pages

Pioneer SC-LX904 User Manual - German - 225 pages

Pioneer SC-LX904 Quick start guide - Dutch - 2 pages

Pioneer SC-LX904 User Manual - Dutch - 225 pages

Pioneer SC-LX904 Quick start guide - French - 2 pages

Pioneer SC-LX904 User Manual - French - 225 pages

Pioneer SC-LX904 Quick start guide - Italian - 2 pages

Pioneer SC-LX904 User Manual - Italian - 225 pages

Pioneer SC-LX904 Quick start guide - Swedish - 2 pages

Pioneer SC-LX904 User Manual - Swedish - 225 pages

Pioneer SC-LX904 Quick start guide - Spanish - 2 pages

Pioneer SC-LX904 User Manual - Spanish - 225 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info