699655
207
Zoom out
Zoom in
Previous page
1/223
Next page
207
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Troubleshooting
Power
When the power is turned on, "AMP Diag Mode" appears on the display of the main unit.
The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display
of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an
abnormality with the speaker cable connection. When the diagnosis is complete, the following messages are displayed.
CH SP WIRE
If the unit returns to the normal ON state after "CH SP WIRE" appears on the display, the speaker cable may have been short-
circuited. After setting the power of this unit to standby state, connect the speaker cable again. Twist the wires exposed from the tip of
the speaker cable so that the wires do not stick out of the speaker terminal.
NG: 
If the operation has stopped with "NG" displayed on the display, set the power of this unit to standby state immediately and remove the
power plug from the outlet. The unit may be malfunctioning. Consult a dealer.
The unit turns off unexpectedly
The unit automatically switches to standby when the "System Setup" - "Hardware" - "Power Management" - "Auto Standby" setting in the Home
screen functions.
The protection circuit function may have operated due to an abnormal rise in temperature of the unit. In such a case, the power turns off
repeatedly even if the power is turned on each time. Secure sufcient ventilation space around the unit, wait for a while until the temperature of
the unit decreases. Then, turn the power on again.
WARNING: If smoke, smell or abnormal noise is produced by the unit, unplug the power cord from the outlet immediately, and contact the dealer or
our company's Support.
( p169)
Audio
Make sure that the speaker setup microphone is no longer connected.
Conrm that the connection between the output jack on the connected device and the input jack on this unit is correct.
Make sure that none of the connecting cables are bent, twisted, or damaged.
If “MUTING” is displayed on the display and is blinking, press on the remote controller to cancel muting.
While headphones are connected to the PHONES jack, no sound is output from the speakers.
When "System Setup" - "Source" - "Audio Select" - "Fixed PCM" in the Home Menu is set to "On", no sound is played when signals other than
PCM are input. Change the setting to Off.
Check the following if the problem persists after you have conrmed the above.
207


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SC-LX704 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-LX704 in the language / languages: English as an attachment in your email.

The manual is 19,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-LX704

Pioneer SC-LX704 Quick start guide - English, German - 2 pages

Pioneer SC-LX704 User Manual - German - 223 pages

Pioneer SC-LX704 Quick start guide - Dutch - 2 pages

Pioneer SC-LX704 User Manual - Dutch - 223 pages

Pioneer SC-LX704 Quick start guide - French - 2 pages

Pioneer SC-LX704 User Manual - French - 223 pages

Pioneer SC-LX704 Quick start guide - Italian - 2 pages

Pioneer SC-LX704 User Manual - Italian - 223 pages

Pioneer SC-LX704 Quick start guide - Swedish - 2 pages

Pioneer SC-LX704 User Manual - Swedish - 223 pages

Pioneer SC-LX704 Quick start guide - Spanish - 2 pages

Pioneer SC-LX704 User Manual - Spanish - 223 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info