699655
197
Zoom out
Zoom in
Previous page
1/223
Next page
197
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
analog or DSD.
Audio Return Channel: You can enjoy the sound of the HDMI-connected ARC-
compatible TV through the speakers connected to the unit. Select "On" when
listening to the audio of TV using the speakers of this unit. Select "Off" when the
ARC function is not used.
Audio
Sound Retriever: Improve the quality of the compressed audio. Playback sound
of lossy compressed les such as MP3 will be improved. The setting can be
separately set to each input selector. The setting is effective in the signals of
48 kHz or less. The setting is not effective in the bitstream signals.
It cannot be set if the listening mode is Direct or Pure Direct.
Midnight: Make small sounds easily heard. It is useful when you need to reduce
the volume while watching a movie late night. You can enjoy the effect only when
playing Dolby series and DTS series input signals.
It cannot be set if the listening mode is Direct or Pure Direct.
The setting cannot be used in the following cases.
If "Loudness Management" is set to "Off" when playing Dolby Digital Plus or
Dolby TrueHD
When the input signal is DTS:X and "Dialog Control" is other than 0 dB
Stereo Assign: When the listening mode is set to "Stereo", the audio output
destination can be set to "Surround", "Surround Back", "Height 1" or "Height 2" in
addition to the normal right and left channels ("Front") of front speakers.
The setting cannot be used in the following cases.
When a listening mode other than “Stereo” is set
When using Speaker B
It is not possible to select speakers that are not set at "System Setup" -
"Speaker" - "Conguration" on the Home screen.
Zone B: Select a method of outputting audio to ZONE B from among "Off",
"On(A+B)" and "On(B)".
In the following cases, "Zone B" cannot be selected.
When ZONE 2 is On
When "System Setup" - "Speaker" - "Conguration" - "Zone 2 Preout" on
the Home screen is set to "Zone 2" (
p160)
Speakers: When Speaker B are used, you switch output between Speaker A/B/
A+B.
Note that sound is not output from the surround back speaker during Speaker
A+B output.
Auto Phase Control+: The low frequencies are recorded with a delay for some
discs not made according to phase control standards. This function corrects the
phase shift when playing such discs. When "Auto" is selected, in addition to the
low frequency delay, the polarity and correlation are also detected and corrected.
It cannot be set if the listening mode is Pure Direct.
Dialog Lifted Up : By adjusting the localization of the center elements, you can
make it easier to hear dialog in movies or give more prominence to the vocals in
music. If you are using front high speakers, you can select from "1" (low) to "4"
(high).
The function cannot be set in the following cases.
When the Front High speakers are not enabled
When the “Adjusting DIALOG” (
p130) function is being used
When “Dialog Control” ( p164) has been set
When the listening mode is Direct or Pure Direct
Audio Scaler : By selecting "Auto", "Hi-bit 32", "Upsampling", and "Digital Filter"
are each automatically set to the optimum values so that you get the high-quality
playback of music les and CDs. The setting can be separately set to each input
selector.
Select "Manual" if you want to manually adjust "Hi-bit 32", "Upsampling", and
"Digital Filter".
Hi-bit 32 : By expanding the dynamic range of digital audio signal sources such
as CDs, DVDs, and BDs, it is possible to achieve a smoother and more rened
sound. The setting can be separately set to each input selector. This can be set
when the sampling frequency is 44.1 kHz or more.
This cannot be set if "Auto" is selected for "Audio Scalar".
Upsampling : By increasing the sampling frequency of PCM 2 channel audio by
a factor of 2 or 4, you can achieve high-quality sound reproduction. The setting
can be separately set to each input selector. This can be set when the sampling
frequency is between 44.1 kHz and 96 kHz. This function works in the Direct,
Pure Direct, and Stereo listening modes.
This cannot be set if "Auto" is selected for "Audio Scalar".
197


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SC-LX704 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-LX704 in the language / languages: English as an attachment in your email.

The manual is 19,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-LX704

Pioneer SC-LX704 Quick start guide - English, German - 2 pages

Pioneer SC-LX704 User Manual - German - 223 pages

Pioneer SC-LX704 Quick start guide - Dutch - 2 pages

Pioneer SC-LX704 User Manual - Dutch - 223 pages

Pioneer SC-LX704 Quick start guide - French - 2 pages

Pioneer SC-LX704 User Manual - French - 223 pages

Pioneer SC-LX704 Quick start guide - Italian - 2 pages

Pioneer SC-LX704 User Manual - Italian - 223 pages

Pioneer SC-LX704 Quick start guide - Swedish - 2 pages

Pioneer SC-LX704 User Manual - Swedish - 223 pages

Pioneer SC-LX704 Quick start guide - Spanish - 2 pages

Pioneer SC-LX704 User Manual - Spanish - 223 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info