699655
184
Zoom out
Zoom in
Previous page
1/223
Next page
184
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Setting Item Default Value Setting Details
Subwoofer 0.0dB Control the effect of standing waves for the
subwoofer.
1. After selecting "Filter" with
/ , select the lter
to be adjusted from "1" to "3" with / and
press ENTER.
2. After selecting the central frequency with / ,
adjust the bandwidth with / , then adjust
the attenuation with / . The central frequency
can be selected between "63Hz" and "250Hz".
The bandwidth can be selected between "2.0"
and "9.8" (0.2 intervals). Attenuation can be
selected between "0.0dB" and "12.0dB" (0.5dB
intervals).
EQ Adjust
If you perform Full Auto MCACC then settings are automatic, but you can also
adjust the output volume of the range of each connected speaker to suit your own
preferences. You can adjust the volume of the different sound ranges for each of
the speakers. You can select up to 4 bands for the Subwoofer and 9 bands for all
other speakers. If the overall volume balance changes by adjusting the volume of
each frequency, you can readjust the balance in "Trim".
Setting Item Default Value Setting Details
Front Left 0.0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/ , adjust
the volume of that frequency between "–12.0 dB"
and "+12.0 dB" (in 0.5 dB intervals) with / . To
readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
Setting Item Default Value Setting Details
Center 0.0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/ , adjust
the volume of that frequency between "–12.0 dB"
and "+12.0 dB" (in 0.5 dB intervals) with / . To
readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Conguration"
- "Speaker Channels" matches the number of
connected channels.
Front Right 0.0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/ , adjust
the volume of that frequency between "–12.0 dB"
and "+12.0 dB" (in 0.5 dB intervals) with / . To
readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
184


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SC-LX704 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-LX704 in the language / languages: English as an attachment in your email.

The manual is 19,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-LX704

Pioneer SC-LX704 Quick start guide - English, German - 2 pages

Pioneer SC-LX704 User Manual - German - 223 pages

Pioneer SC-LX704 Quick start guide - Dutch - 2 pages

Pioneer SC-LX704 User Manual - Dutch - 223 pages

Pioneer SC-LX704 Quick start guide - French - 2 pages

Pioneer SC-LX704 User Manual - French - 223 pages

Pioneer SC-LX704 Quick start guide - Italian - 2 pages

Pioneer SC-LX704 User Manual - Italian - 223 pages

Pioneer SC-LX704 Quick start guide - Swedish - 2 pages

Pioneer SC-LX704 User Manual - Swedish - 223 pages

Pioneer SC-LX704 Quick start guide - Spanish - 2 pages

Pioneer SC-LX704 User Manual - Spanish - 223 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info