699655
162
Zoom out
Zoom in
Previous page
1/223
Next page
162
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Distance
Set the distance from each speaker to the listening position. If multiple settings
are saved in the MCACC Memory, press on the remote controller, and select
the MCACC Memory rst in "AV Adjust" - "MCACC" - "MCACC Memory".
Setting Item Default Value Setting Details
Front Left 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
Center 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
Front Right 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
Height 1 Left 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 1 Right 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 2 Left 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 2 Right 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surround Right 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
Surr Back Right 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Setting Item Default Value Setting Details
Surr Back Left 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surround Left 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
Subwoofer 1 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
Subwoofer 2 10' 0"/3.00 m Specify the distance between each speaker and
the listening position.
• Default values vary depending on the regions.
• Distance units can be switched by pressing MODE on the remote controller. When the
unit is set as feet, you can set between 0' 0" 1/2 and 30' 0" in increments of 1/2. When
the unit is set as meters, you can set between 0.01 m and 9.00 m in increments of 0.01
m.
Channel Level
Adjust the volume level of each speaker. If multiple settings are saved in the
MCACC Memory, press on the remote controller, and select the MCACC
Memory rst in "AV Adjust" - "MCACC" - "MCACC Memory".
Setting Item Default Value Setting Details
Front Left 0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB" (in
0.5 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Center 0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB" (in
0.5 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Front Right 0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB" (in
0.5 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Height 1 Left 0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB" (in
0.5 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SC-LX704 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-LX704 in the language / languages: English as an attachment in your email.

The manual is 19,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-LX704

Pioneer SC-LX704 Quick start guide - English, German - 2 pages

Pioneer SC-LX704 User Manual - German - 223 pages

Pioneer SC-LX704 Quick start guide - Dutch - 2 pages

Pioneer SC-LX704 User Manual - Dutch - 223 pages

Pioneer SC-LX704 Quick start guide - French - 2 pages

Pioneer SC-LX704 User Manual - French - 223 pages

Pioneer SC-LX704 Quick start guide - Italian - 2 pages

Pioneer SC-LX704 User Manual - Italian - 223 pages

Pioneer SC-LX704 Quick start guide - Swedish - 2 pages

Pioneer SC-LX704 User Manual - Swedish - 223 pages

Pioneer SC-LX704 Quick start guide - Spanish - 2 pages

Pioneer SC-LX704 User Manual - Spanish - 223 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info