577805
103
Zoom out
Zoom in
Previous page
1/140
Next page
103
The System Setup and Other Setup menus
12
! 5.2 +ZONE 2+HDZONE – Select to use the surround back (ZONE 2) and front wide (HDZONE) speaker termi-
nals for an independent systems in another zone (see Using the MULTI-ZONE controls on page 84 ).
! 5.2ch + SP-B Bi-Amp – Select this setting if you’re bi-amping your B speakers (see Bi-amping your speakers
on page 25 ).
! 5.2ch F+Surr Bi-Amp – Select this setting if you’re bi-amping your front and surround speakers (see
Bi-amping your speakers on page 25 ).
! 5.2ch F+C Bi-Amp – Select this setting if you’re bi-amping your front and center speakers (see Bi-amping
your speakers on page 25 ).
! 5.2ch C+Surr Bi-Amp – Select this setting if you’re bi-amping your center and surround speakers (see
Bi-amping your speakers on page 25 ).
! Multi-ZONE Music – See Using Multi-ZONE Music on page 103 .
3 If you selected 7.2.2ch TMd/FW, 7.2.2ch TMd/FH, 7.2ch + Speaker B, 7.2ch + Front Bi-Amp,
or 7.2ch + HDZONE in Step 2, select the placement of the surround speakers.
In a 7.2-channel surround system with surround speakers placed directly at the sides of the listening position,
the surround sound of 5.1-channel sources is heard from the side. This function mixes the sound of the surround
speakers with the surround back speakers so that the surround sound is heard from diagonally to the rear as it
should be.
Depending on the positions of the speakers and the sound source, in some cases it may not be possible to
achieve good results. In this case, set the setting to ON SIDE or IN REAR.
! ON SIDE – Select when the surround speakers is positioned right beside you.
! IN REAR – Select when the surround speaker is positioned obliquely behind you.
4 When ‘Setting Change?’ is displayed, select Yes.
If No is selected, the setting is not changed.
You will return to the Manual SP Setup menu.
Using Multi-ZONE Music
Multi-ZONE Music can be used to play the same sound in the MAIN ZONE, ZONE 2 and ZONE 3, for example for
home parties. Normally set Speaker System to 5.2 +ZONE 2+ZONE 3 for multi-zone/multi-source playback, then
switch it to Multi-ZONE Music when having a home party. When this is done, the sound of the input function
selected for the MAIN ZONE is played in all zones (the MAIN ZONE, ZONE 2 and ZONE 3).
! There is virtually no delay in the sound.
! Switching of the input for only ZONE 2 or ZONE 3 is disabled, but the volume can be adjusted or muted for the
individual zones.
! This is only valid for ZONE 2 and ZONE 3 connections using the speaker terminals. No sound is output from the
ZONE 2 and ZONE 3 pre-out terminals. Nothing is output from the ZONE 2 and ZONE 3 COMPONENT VIDEO
output and VIDEO output terminals.
! The HDZONE setting does not apply to Multi-ZONE Music.
Speaker Setting
Use this setting to specify your speaker configuration (size, number of speakers and crossover frequency). It
is a good idea to make sure that the settings made in Automatically conducting optimum sound tuning (Full
Auto MCACC) on page 48 are correct. Note that this setting applies to all MCACC presets, and cannot be set
independently.
1 Select ‘Speaker Setting’ from the Manual SP Setup menu.
2 Choose the set of speakers that you want to set, then select a speaker size.
Use k/l to select the size (and number) of each of the following speakers:
! Front – Select LARGE if your front speakers reproduce bass frequencies effectively, or if you didn’t connect a
subwoofer. Select SMALL to send the bass frequencies to the subwoofer.
! Center – Select LARGE if your center speaker reproduces bass frequencies effectively, or select SMALL to
send bass frequencies to the other speakers or subwoofer. If you didn’t connect a center speaker, choose NO
(the center channel is sent to the front speakers).
! TMd – Select LARGE if your top middle speakers reproduce bass frequencies effectively, or select SMALL
to send bass frequencies to the other speakers or subwoofer. When Dolby Enabled Speaker is used, select
Dolby Sp (page 23 ). If you didn’t connect the top middle speakers, choose NO (the top middle channel is
sent to the front speakers).
You can adjust this setting only when Speaker System setting is 7.2.2ch TMd/FW, 7.2.2ch TMd/FH,
5.2.4ch or 7.2ch + Speaker B.
If you change the setting from Dolby Sp to SMALL or LARGE, the set value for Speaker Distance
may be changed. This is because the maximum value of Speaker Distance when set to Dolby Sp is
bigger than the maximum value of Speaker Distance when set to SMALL and LARGE. If the value of
Speaker Distance set to Dolby Sp exceeds the maximum value of Speaker Distance for SMALL and
LARGE, Speaker Distance for SMALL and LARGE is set to its maximum value.
! TFw – Select LARGE if your top forward speakers reproduce bass frequencies effectively, or select SMALL
to send bass frequencies to the other speakers or subwoofer. When Dolby Enabled Speaker is used, select
Dolby Sp (page 23 ). If you didn’t connect the top forward speakers, choose NO (the top forward channel is
sent to the front speakers).
You can adjust this setting only when Speaker System setting is 5.2.4ch.
When you set TBw to NO, this setting is automatically set to NO.
If you change the setting from Dolby Sp to SMALL or LARGE, the set value for Speaker Distance
may be changed. This is because the maximum value of Speaker Distance when set to Dolby Sp is
bigger than the maximum value of Speaker Distance when set to SMALL and LARGE. If the value of
Speaker Distance set to Dolby Sp exceeds the maximum value of Speaker Distance for SMALL and
LARGE, Speaker Distance for SMALL and LARGE is set to its maximum value.
! TBw – Select LARGE if your top backward speakers reproduce bass frequencies effectively, or select SMALL
to send bass frequencies to the other speakers or subwoofer. When Dolby Enabled Speaker is used, select
Dolby Sp (page 23 ). If you didn’t connect the top backward speakers, choose NO (the top backward chan-
nel is sent to the front speakers).
You can adjust this setting only when Speaker System setting is 5.2.4ch.
When you set TFw to NO, this setting is automatically set to NO.
If you change the setting from Dolby Sp to SMALL or LARGE, the set value for Speaker Distance
may be changed. This is because the maximum value of Speaker Distance when set to Dolby Sp is
bigger than the maximum value of Speaker Distance when set to SMALL and LARGE. If the value of
Speaker Distance set to Dolby Sp exceeds the maximum value of Speaker Distance for SMALL and
LARGE, Speaker Distance for SMALL and LARGE is set to its maximum value.
 
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SC-LX58-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-LX58-S in the language / languages: English as an attachment in your email.

The manual is 16,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-LX58-S

Pioneer SC-LX58-S Quick start guide - English, German - 76 pages

Pioneer SC-LX58-S User Manual - German - 147 pages

Pioneer SC-LX58-S Quick start guide - Dutch - 76 pages

Pioneer SC-LX58-S User Manual - Dutch - 145 pages

Pioneer SC-LX58-S Quick start guide - French - 76 pages

Pioneer SC-LX58-S User Manual - French - 144 pages

Pioneer SC-LX58-S Quick start guide - Italian - 76 pages

Pioneer SC-LX58-S User Manual - Italian - 143 pages

Pioneer SC-LX58-S Quick start guide - Spanish - 76 pages

Pioneer SC-LX58-S User Manual - Spanish - 143 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info