Manual Pioneer SC-2024 (page 92 of 126) (English)

611800

Zoom out

Zoom in

1/126

The System Setup and Other Setup menus

Network Setup menu

Make the settings for connecting the receiver to the Internet and using the network functions.

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

2 Select ‘System Setup’ from the HOME MENU.

3 Select ‘Network Setup’ from the System Setup menu.

4 Select the setting you want to adjust.

If you are doing this for the first time, you may want to adjust these settings in order:

! IP Address, Proxy – Sets up the IP address/Proxy of this receiver (page 92 ).

! Network Standby – Even when the unit is in standby mode, it is possible to turn on the power of the unit

from iControlAV5 (page 92 ).

! Friendly Name – The name of the receiver displayed on a computer or other device connected to the network

can be changed (page 92 ).

! Parental Lock – Restricts usage of network functions (page 93 ).

! Port Number Setting – Sets the numbers of the ports where signals from IP Control are received (page 93 ).

IP address/Proxy setting

In case the router connected to the LAN terminal on this receiver is a broadband router (with a built-in DHCP

server function), simply turn on the DHCP server function, and you will not need to set up the network manually.

You must set up the network as described below only when you have connected this receiver to a broadband

router without a DHCP server function. Before you set up the network, consult with your ISP or the network man-

ager for the required settings. It is advised that you also refer to the operation manual supplied with your network

component.

! In case you make changes to the network configuration without the DHCP server function, make the corre-

sponding changes to the network settings of this receiver.

IP Address

The IP address to be entered must be defined within the following ranges. If the IP address defined is beyond the

following ranges, you cannot play back audio files stored on components on the network or listen to Internet radio

stations.

Class A: 10.0.0.1 to 10.255.255.254

Class B: 172.16.0.1 to 172.31.255.254

Class C: 192.168.0.1 to 192.168.255.254

Subnet Mask

In case an xDSL modem or a terminal adapter is directly connected to this receiver, enter the subnet mask pro-

vided by your ISP on paper. In most cases, enter 255.255.255.0.

Default Gateway

In case a gateway (router) is connected to this receiver, enter the corresponding IP address.

Primary DNS Server/Secondary DNS Server

In case there is only one DNS server address provided by your ISP on paper, enter it in the ‘Primary DNS Server’

field. In case there are more than two DNS server addresses, enter ‘Secondary DNS Server’ in the other DNS

server address field.

Proxy Hostname/Proxy Port

This setting is required when you connect this receiver to the Internet via a proxy server. Enter the IP address

of your proxy server in the ‘Proxy Hostname’ field. Also, enter the port number of your proxy server in the

‘Proxy Port’ field.

1 Select ‘IP Address, Proxy’ from the Network Setup menu.

2 Select the DHCP setting you want.

When you select ON, the network is automatically set up, and you do not need to follow Steps 3. Proceed with

Step 4.

If there is no DHCP server on the network and you select ON, this receiver will use its own Auto IP function to

determine the IP address.

! The IP address determined by the Auto IP function is 169.254.X.X. You cannot listen to an Internet radio sta-

tion if the IP address is set for the Auto IP function.

3 Enter the IP Address, Subnet Mask, Default Gateway, Primary DNS Server and

Secondary DNS Server.

Press i/j to select a number and k/l to move the cursor.

4 Select ‘OFF’ or ‘ON’ for the Enable Proxy Server setting to deactivate or activate the proxy

server.

In case you select ‘OFF’, proceed with Step 7. In case you select ‘ON’, on the other hand, proceed with Step 5.

5 Enter the address of your proxy server or the domain name.

Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection.

6 Enter the port number of your proxy server.

Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection.

7 Select ‘OK’ to confirm the IP Address/Proxy setup.

Network Standby

Set so that the iControlAV5 function connected to the same LAN with the receiver can be used even while the unit

is in standby status.

1 Select ‘Network Standby’ from the Network Setup menu.

2 Specify whether the Network Standby is ON or OFF.

! ON – Even when the unit is in standby mode, it is possible to turn on the power of the unit from the device

iControlAV5 that is connected to the network.

! OFF – The iControlAV5 function is not available while the receiver is in standby mode (power consumption

during standby can be suppressed).

Friendly Name

1 Select ‘Friendly Name’ from the Network Setup menu.

2 Select ‘Edit Name’ then select ‘Rename’.

If after changing the name you want to restore the name to the default, select Default.

3 Input the name you want.

Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-2024 in the language / languages: English as an attachment in your email.

The manual is 7,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-2024

Pioneer SC-2024 Quick start guide - English, German - 76 pages

Pioneer SC-2024 User Manual - German - 133 pages

Pioneer SC-2024 Quick start guide - Dutch - 76 pages

Pioneer SC-2024 User Manual - Dutch - 130 pages

Pioneer SC-2024 Quick start guide - French - 76 pages

Pioneer SC-2024 User Manual - French - 129 pages

Pioneer SC-2024 Quick start guide - Italian, Spanish - 76 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer SC-2024 Manual

Product: