Manual Pioneer SC-2024 (page 73 of 126) (English)

611800

Zoom out

Zoom in

1/126

Using other functions

Using the MULTI-ZONE controls

The following steps use the front panel controls to adjust the sub zone volume and select sources. See ZONE 2

remote controls and HDZONE remote controls on page 73 .

Important

! ZONE 3 is a function for SC-2024 only. It cannot be selected or set with SC-1224.

— The settings must be changed at ZONE Setup in order to use the HDZONE function (page 95 ).

1 Press the button on the front panel for the zone you want to operate (ZONE 2 ON/OFF,

ZONE 3 ON/OFF or HDZONE ON/OFF).

The zone switches between on and off each time the button is pressed.

The MULTI-ZONE indicator lights when the MULTI-ZONE control has been switched ON.

2 Press MULTI-ZONE CONTROL on the front panel to select the sub zone(s) you want.

! When the receiver is on, make sure that any operations for the sub zone are done while ZONE and your

selected sub zone(s) show in the display. If this is not showing, the front panel controls affect the main zone

only.

If the receiver is in standby, the display is dimmed, and ZONE and your selected sub zone(s) continue to show

in the display.

3 Use the INPUT SELECTOR dial to select the source for the zone you have selected.

For example, ZONE 2 SAT/CBL sends the source connected to the SAT/CBL inputs to the primary (ZONE 2) sub

room.

! If you select TUNER, you can use the tuner controls to select a preset station (see Saving station presets on

page 49 if you’re unsure how to do this). The tuner cannot be tuned to more than one station at a time.

Therefore, changing the station in one zone also changes the station in the other zone. Please be careful not

to change stations when recording a radio broadcast.

4 Use the MASTER VOLUME dial to adjust the volume for the sub zone.

When Speaker System is set to anything other than ZONE 2, the volume output from the receiver’s AUDIO

ZONE 2 OUT terminals can be fixed to –40 dB or 0 dB and the volume can be adjusted from the connected ampli-

fier. If you want to adjust the volume from the connected amplifier, see ZONE Setup on page 95 .

5 When you’re finished, press MULTI-ZONE CONTROL again to return to the main zone

controls.

You can also press ZONE 2 ON/OFF, ZONE 3 ON/OFF or HDZONE ON/OFF on the front panel to switch off all

output to the sub zone.

! You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control

first.

! If you don’t plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main

rooms so that this receiver is in standby.

Note

When the network function or iPod/USB input is selected using HDZONE, the video converter function is dis-

abled. For that reason, video connected with the video cable or component cable is not output from the HDMI

terminal. Also, upscaling of the HDMI input video cannot be performed. To enable the video converter function,

turn off HDZONE or set HDZONE to some other input.

ZONE 2 remote controls

Before operation, hold down Z2 on the remote control (for 1.5 seconds) until the remote control LED flashes one

time.

The following table shows the possible ZONE 2 remote controls:

Button(s) What it does

Switches on/off power in the sub zone.

ALL

Use to select the input function in the sub zone.

Input function buttons

Use to select the input function directly (this may not work for some functions) in the sub

zone.

VOLUME +/–

<a>

Use to set the listening volume in the sub zone.

MUTE

<a>

Mutes the sound or restores the sound if it has been muted (adjusting the volume also

restores the sound).

a ! The volume cannot be adjusted on the receiver if Volume Level at ZONE 2 Setup under ZONE Setup is set to –40 dB Fixed

or 0 dB Fixed.

ZONE 3 remote controls

Press the remote control’s Z3 to operate the corresponding zone.

The following table shows the possible ZONE 3 remote controls:

Button(s) What it does

Switches on/off power in the sub zone.

ALL

Use to select the input function in the sub zone.

Input function buttons

Use to select the input function directly (this may not work for some functions) in the sub

zone.

VOLUME +/–

<a>

Use to set the listening volume in the sub zone.

MUTE

<a>

Mutes the sound or restores the sound if it has been muted (adjusting the volume also

restores the sound).

a ! The volume cannot be adjusted on the receiver if Volume Level at ZONE 3 Setup under ZONE Setup is set to –40 dB Fixed

or 0 dB Fixed.

HDZONE remote controls

Before operation, hold down HDZ on the remote control (for 1.5 seconds) until the remote control LED flashes

one time.

The following table shows the possible HDZONE remote controls:

Button(s) What it does

Switches on/off power in the HDZONE.

ALL

Use to select the input function in the HDZONE.

Input function buttons

Use to select the input function directly (this may not work for some functions) in the

HDZONE.

VOLUME +/–

<a>

Use to set the listening volume in the HDZONE.

MUTE

<a>

Mutes the sound or restores the sound if it has been muted (adjusting the volume also

restores the sound).

a You can operate this only when Speaker System is set to HDZONE.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-2024 in the language / languages: English as an attachment in your email.

The manual is 7,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-2024

Pioneer SC-2024 Quick start guide - English, German - 76 pages

Pioneer SC-2024 User Manual - German - 133 pages

Pioneer SC-2024 Quick start guide - Dutch - 76 pages

Pioneer SC-2024 User Manual - Dutch - 130 pages

Pioneer SC-2024 Quick start guide - French - 76 pages

Pioneer SC-2024 User Manual - French - 129 pages

Pioneer SC-2024 Quick start guide - Italian, Spanish - 76 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer SC-2024 Manual

Product: