Manual Pioneer SC-1224 (page 64 of 126) (English)

611801

Zoom out

Zoom in

1/126

Control with HDMI function

About the Control with HDMI function

Synchronized operations below with a Control with HDMI-compatible Pioneer TV or Blu-ray Disc player are pos-

sible when the component is connected to the receiver using an HDMI cable.

! The receiver’s volume can be set and the sound can be muted using the TV’s remote control.

! The receiver’s input switches over automatically when the TV’s input is changed or a Control with HDMI-

compatible component is played.

! The receiver’s power is also set to standby, when the TV’s power is set to standby.

Important

! With Pioneer devices, the Control with HDMI functions are referred to as “KURO LINK”.

! You cannot use this function with components that do not support Control with HDMI.

! We only guarantee this receiver will work with Pioneer Control with HDMI-compatible components. However,

we do not guarantee that all synchronized operations will work with components that support the Control with

HDMI function.

! Use a High Speed HDMI

cable when you want to use the Control with HDMI function. The Control with

HDMI function may not work properly if a different type of HDMI cable is used.

! For details about concrete operations, settings, etc., refer to also the operating instructions for each

component.

Making Control with HDMI connections

You can use synchronized operation for a connected TV and other components.

! Be sure to connect the TV’s audio cable to the audio input of this unit. When the TV and receiver are connected

by HDMI connections, if the TV supports the HDMI ARC (Audio Return Channel) function, the sound of the

TV is input to the receiver via the HDMI OUT 1 terminal, so there is no need to connect an audio cable. In this

case, set ARC at HDMI Setup to ON (see HDMI Setup on page 64 ).

For details, see Connecting your TV and playback components on page 25 .

Important

! When connecting this system or changing connections, be sure to switch the power off and disconnect the

power cord from the wall socket. After completing all connections, connect the power cords to the wall socket.

! After this receiver is connected to an AC outlet, a 2 second to 10 second HDMI initialization process begins.

You cannot carry out any operations during this process. The HDMI indicator in the front panel display blinks

during this process, and you can turn on this receiver once it has stopped blinking. When you set the Control

with HDMI to OFF, you can skip this process. For details about the Control with HDMI feature, see Control with

HDMI function on page 63 .

! To get the most out of this function, we recommend that you connect your HDMI component not to a TV but

rather directly to the HDMI terminal on this receiver.

! The Control with HDMI function can be used with a TV connected to the HDMI OUT 1 terminal, but not with a

TV connected to the HDMI OUT 2 terminal.

HDMI Setup

You must adjust the settings of this receiver as well as the connected Control with HDMI-compatible compo-

nents in order to make use of the Control with HDMI function. For more information see the operating instruc-

tions for each component.

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

2 Select ‘System Setup’, then press ENTER.

3 Select ‘HDMI Setup’, then press ENTER.

4 Select the ‘Control’ setting you want.

Choose whether to set this unit’s Control with HDMI function ON or OFF. You will need to set it to ON to use the

Control with HDMI function.

When using a component that does not support the Control with HDMI function, set this to OFF.

! ON – Enables the Control with HDMI function. Set Control Mode, ARC and PQLS in the subsequent setting

items to the desired values.

Also, by setting this to ON, the Sound Retriever Link and Stream Smoother Link functions can be operated

automatically by connecting a player supporting the respective functions. See Setting the Audio options on

page 68 for details on Sound Retriever Link, Setting the Video options on page 70 for details on Stream

Smoother Link.

! OFF – The Control with HDMI is disabled. The Control Mode, ARC and PQLS functions in the subsequent

setting items cannot be used.

5 Select the ‘Control Mode’ setting you want.

Choose whether you want to enable synchronized operations.

! ON – Enabled for the synchronized operations.

! OFF – The synchronized operations disabled.

6 Select the ‘ARC’ setting you want.

When a TV supporting the HDMI ARC (Audio Return Channel) function is connected to the receiver, the sound of

the TV can be input via the HDMI OUT 1 terminal.

After setting the ARC, some time may be required for the connected device to be recognized and the sound to be

produced.

! ON – The TV’s sound is input via the HDMI terminal.

! OFF – The TV’s sound is input from the Audio input terminals other than HDMI inputs.

7 Select the ‘PQLS’ setting you want.

Choose whether to set this unit’s PQLS function AUTO or OFF.

For details about PQLS function, see Setting the PQLS function on page 65 .

! AUTO – PQLS is enabled. A precision quartz controller in this receiver eliminates distortion caused by timing

errors (jitter), giving you the best possible digital-to-analog conversion when you use the HDMI interface. This

is valid as an HDMI function for PQLS-compatible players.

! OFF – PQLS is disabled.

8 Select the ‘Standby Through’ setting you want.

It is possible to transfer signals from an HDMI-connected player to the TV when this receiver’s power is on

standby.

Select the HDMI input whose HDMI signal is to be input for through transfer when in the standby mode. When

LAST is selected, the signal being input to the currently selected HDMI input is transferred. When OFF is

selected, no HDMI input is transferred through when in the standby mode. (However, when Control is set to ON,

the HDMI signal is transferred through by the Control with HDMI function even when in the standby mode.)

! When anything other than OFF is set for this setting, the receiver’s HDMI input can be switched even when

the receiver is in the standby mode. (Switch by pointing the remote control at the receiver and pressing the

HDMI, BD, DVD or SAT/CBL button.)

! Setting to anything other than OFF increases power consumption in the standby mode.

! This setting can be used even with devices that are not compatible with the Control with HDMI function.

! The Standby Through function cannot be used with MHL-compatible devices.

9 When you’re finished, press HOME MENU.

I have an SC 1224 receiver. I have a couple of Sonos wifi speakers. I have a mesh wifi setup in my home from my internet connection. I would like to play music from the receiver over wifi to my speakers in other parts of the house. I.e. my music is on my phone, I connect my phone to the receiver via Bluetooth, the receiver will output to the speakers wired to it in the same room, a basic setup. Now if I want to extend that music to my wireless speakers in other parts of the house too far away for Bluetooth to reach, I should be able to use my home wifi network, but how do I get the receiver to 'talk' to my home wifi network so that it can pass a signal to my wireless speakers? Submitted on 16-6-2023 at 06:39
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-1224 in the language / languages: English as an attachment in your email.

The manual is 7,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-1224

Pioneer SC-1224 Quick start guide - English, German - 76 pages

Pioneer SC-1224 User Manual - German - 133 pages

Pioneer SC-1224 Quick start guide - Dutch - 76 pages

Pioneer SC-1224 User Manual - Dutch - 130 pages

Pioneer SC-1224 Quick start guide - French - 76 pages

Pioneer SC-1224 User Manual - French - 129 pages

Pioneer SC-1224 Quick start guide - Italian, Spanish - 76 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer SC-1224 Manual

Product: