Manual Pioneer SC-1224 (page 46 of 126) (English)

611801

Zoom out

Zoom in

1/126

Basic playback

Playing an iPod

This receiver has the iPod/iPhone terminal that will allow you to control playback of audio content from your iPod

using the controls of this receiver.

Here we describe the procedure for playback on an iPod. For playback on a USB device, see Playing a USB device

on page 47 .

Important

! USB works with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPhone 3G, iPhone, iPod

touch (1st through 5th generation) and iPod nano (3rd through 7th generation).

However, some of the functions may be restricted for some models.

! This receiver has been developed and tested for the software version of iPod/iPhone indicated on the website

of Pioneer.

http://pioneer.jp/homeav/support/ios/eu/ (for Europe)

http://pioneer.jp/homeav/support/ios/ao/ (for Australia and New Zealand)

! Installing software versions other than indicated on the website of Pioneer to your iPod/iPhone may result in

incompatibility with this receiver.

! iPod and iPhone are licensed for reproduction of non-copyrighted materials or materials the user is legally

permitted to reproduce.

! Features such as the equalizer cannot be controlled using this receiver, and we recommend switching the

equalizer off before connecting.

! Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any

inconvenience or loss of recorded material resulting from the iPod failure.

! When listening to a track on the iPod in the main zone, it is possible to control the sub zone, but not to listen to

a different track in the sub zone from the one playing in the main zone.

1 Press u STANDBY/ON to switch on the receiver and your TV.

See Connecting an iPod on page 34 .

About one minute is required between turning the power on and completion of startup.

! It is also possible to operate the iPod on the iPod itself, without using the TV screen. For details, see

Switching the iPod controls on page 46 .

2 Press iPod USB on the remote control to switch the receiver to the iPod/USB.

When the display shows the names of folders and files, you’re ready to play music from the iPod.

Playing back audio files stored on an iPod

To navigate songs on your iPod, you can take advantage of the GUI screen of your TV connected to this receiver.

You can also control all operations for music in the front panel display of this receiver.

! Note that characters that cannot be displayed on this receiver are displayed as #.

! This feature is not available for photos on your iPod.

Finding what you want to play

When your iPod is connected to this receiver, you can browse songs stored on your iPod by playlist, artist name,

album name, song name, genre or composer, similar to using your iPod directly.

1 Use i/j to select a category, then press ENTER to browse that category.

! When o or p is pressed at the list screen, the page switches.

! To return to the previous level any time, press RETURN.

2 Use i/j to browse the selected category (e.g., albums).

! Use k/l to move to previous/next levels.

3 Continue browsing until you arrive at what you want to play, then press d to start

playback.

! On the playback screen, pressing RETURN displays a list screen. To return to the playback screen, press

DISP.

Note

You can play all of the songs in a particular category by selecting the All item at the top of each category list. For

example, you can play all the songs by a particular artist.

Basic playback controls

This receiver’s remote control buttons can be used for basic playback of files stored on an iPod.

TOP

RETURN

ENTER

HOME

DISP

Switching the iPod controls

You can switch over the iPod controls between the iPod and the receiver.

1 Press HOME MENU to switch the iPod controls.

This enables operation and display on your iPod, and this receiver’s remote control and GUI screen become

inactive.

2 Press HOME MENU again to switch back to the receiver controls.

Note

Change the receiver’s input to the iPod in one action by pressing the iPod iPhone DIRECT CONTROL button on

the front panel to enable iPod operations on the iPod.

I have an SC 1224 receiver. I have a couple of Sonos wifi speakers. I have a mesh wifi setup in my home from my internet connection. I would like to play music from the receiver over wifi to my speakers in other parts of the house. I.e. my music is on my phone, I connect my phone to the receiver via Bluetooth, the receiver will output to the speakers wired to it in the same room, a basic setup. Now if I want to extend that music to my wireless speakers in other parts of the house too far away for Bluetooth to reach, I should be able to use my home wifi network, but how do I get the receiver to 'talk' to my home wifi network so that it can pass a signal to my wireless speakers? Submitted on 16-6-2023 at 06:39
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-1224 in the language / languages: English as an attachment in your email.

The manual is 7,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-1224

Pioneer SC-1224 Quick start guide - English, German - 76 pages

Pioneer SC-1224 User Manual - German - 133 pages

Pioneer SC-1224 Quick start guide - Dutch - 76 pages

Pioneer SC-1224 User Manual - Dutch - 130 pages

Pioneer SC-1224 Quick start guide - French - 76 pages

Pioneer SC-1224 User Manual - French - 129 pages

Pioneer SC-1224 Quick start guide - Italian, Spanish - 76 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer SC-1224 Manual

Product: