Manual Pioneer SC-1224 (page 42 of 126) (English)

611801

Zoom out

Zoom in

1/126

Basic Setup

Operation Mode Setup

This receiver is equipped with a great number of functions and settings. The Operation Mode feature is provided

for users who find it difficult to master all these functions and settings.

One of two settings can be selected for the Operation Mode: Expert and Basic.

! With factory default settings, the on-screen display will be output from all HDMI output terminals and

displayed on any TV connected via HDMI cable. You can change where the screen is output in the

MAIN/HDZONE (page 95 ) and HDMI output (page 72 ) settings.

Important

! Many of the settings and functions cannot be selected when the Operation Mode is changed to Basic.

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

2 Select ‘Operation Mode Setup’ from the HOME MENU.

3 Select the Operation Mode setting you want.

! Expert (default) – Users can set all the functions by themselves.

! Basic – Only certain basic settings can be operated. The settings that can be operated are shown below. They

can be set as necessary by referring to the operating instructions.

Operable settings/items Descriptions Page

HOME MENU

Full Auto MCACC

Makes high precision sound field settings easily.

Input Name

Input names can be changed as desired for easier use.

Input Skip

Inputs not being used are skipped (not displayed).

Software Update

Updates to the latest version of the software.

Network Information

Checks the receiver’s IP address.

Audio Parameters

MCACC

(MCACC preset)

Selects your favorite MCACC preset memory.

DELAY

(Sound Delay)

Adjusts the delay time of the overall sound.

S.RTRV

(Auto Sound Retriever)

Plays compressed sound with high sound quality.

DUAL

(Dual Mono)

Dual monaural audio setting.

INPUT ATT

(Input attenuate)

Decreases the input signal level to reduce distortion.

V.SPs

(Virtual Speakers)

Automatically complements virtual surround speakers (surround

back, front height and front wide) to create a sound field.

V.SB

(Virtual Surround Back)

Creates a virtual surround back channel sound for playback.

V.HEIGHT

(Virtual Height)

Creates a virtual height channel sound for playback.

V.WIDE

(Virtual Wide)

Creates a virtual wide channel sound for playback.

Operable settings/items Descriptions Page

V.DEPTH

(Virtual Depth)

Plays with a sound field suited for 3D images.

Other functions

ALL (INPUT SELECTOR) Switches the input.

VOLUME +/–, MUTE Use to set the listening volume.

LISTENING MODE

Selects your favorite listening modes.

PQLS

Plays using the PQLS function.

PHASE (Phase Control) Plays with phase shifting in the low range corrected.

SOUND RETRIEVER AIR

Switches the input to BT AUDIO and plays compressed sound with

high sound quality.

iPod iPhone DIRECT CONTROL

Switches the input to iPod/USB and sets the mode allowing operation

from the iPod.

4 When you’re finished, press RETURN.

You will return to the HOME MENU.

Changing the OSD display language (OSD Language)

The language used on the Graphical User Interface screen can be changed.

! The explanations in these operating instructions are for when English is selected for the GUI screen.

! With factory default settings, the on-screen display will be output from all HDMI output terminals and

displayed on any TV connected via HDMI cable. You can change where the screen is output in the

MAIN/HDZONE (page 95 ) and HDMI output (page 72 ) settings.

1 Press u STANDBY/ON to switch on the receiver and your TV.

Make sure that the TV’s video input is set to this receiver (for example, if you connected this receiver to the VIDEO

jacks on your TV, make sure that the VIDEO input is now selected).

2 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

3 Select ‘System Setup’ from the Home Menu.

4 Select ‘OSD Language’ from the System Setup menu.

5 Select the desired language.

6 Select ‘OK’ to change the language.

The setting is completed and the System Setup menu reappears automatically.

I have an SC 1224 receiver. I have a couple of Sonos wifi speakers. I have a mesh wifi setup in my home from my internet connection. I would like to play music from the receiver over wifi to my speakers in other parts of the house. I.e. my music is on my phone, I connect my phone to the receiver via Bluetooth, the receiver will output to the speakers wired to it in the same room, a basic setup. Now if I want to extend that music to my wireless speakers in other parts of the house too far away for Bluetooth to reach, I should be able to use my home wifi network, but how do I get the receiver to 'talk' to my home wifi network so that it can pass a signal to my wireless speakers? Submitted on 16-6-2023 at 06:39
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-1224 in the language / languages: English as an attachment in your email.

The manual is 7,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-1224

Pioneer SC-1224 Quick start guide - English, German - 76 pages

Pioneer SC-1224 User Manual - German - 133 pages

Pioneer SC-1224 Quick start guide - Dutch - 76 pages

Pioneer SC-1224 User Manual - Dutch - 130 pages

Pioneer SC-1224 Quick start guide - French - 76 pages

Pioneer SC-1224 User Manual - French - 129 pages

Pioneer SC-1224 Quick start guide - Italian, Spanish - 76 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer SC-1224 Manual

Product: