794029
39
Zoom out
Zoom in
Previous page
1/65
Next page
Bluetooth
® Audio playback
39
13
When PIN code entry is requested, enter “0000.” (This
unit does not accept any PIN code setting other than
0000.”)
4 Confirm on the
Bluetooth
capable device
that pairing has been completed.
If pairing with the Bluetooth capable device has been
completed correctly, the name of the Bluetooth capable
device will be displayed on the front panel of the unit. (Only
single-byte alphanumeric characters can be displayed. Any
character that cannot be displayed will be indicated by a “”.)
On BT CONNECT LED display
Listen to music on the unit from a
Bluetooth
capable device
1 Press the
BT AUDIO
.
The unit will switch to BT AUDIO input.
2A
Bluetooth
connection will be created
between the
Bluetooth
capable device and the
unit.
Procedures for connecting to the unit should be performed
from the Bluetooth capable device.
Please refer to the user’s manual for your Bluetooth
capable device for details of the connection procedures.
3 Playback music from the
Bluetooth
capable
device.
BT STANDBY
The following can be done when the unit is on standby
with the BT STANDBY switched ON.
By selecting a Bluetooth capable device that already has
a connection history (pairing has already been
conducted) with this unit, this unit will automatically
turn on with the BT AUDIO function.
BT STANDBY settings
1 Press
HOME MENU
.
2 Press
/
to select “
Network Standby
”,
then press
ENTER
.
3 Press
/
to select “
ON
”, then press
ENTER
.
Connection while in BT STANDBY mode with
Bluetooth
capable device
When connection history (pairing has already been
conducted) with a Bluetooth capable device exists for the unit
during BT STANDBY, the unit can receive a connection
request directly from the connection history.
The unit will start using the BT AUDIO function, and connect
with a Bluetooth capable device.
Even devices that have already been paired with this unit will
not connect during BT STANDBY in the following cases.
In such cases, delete pairing history from the Bluetooth
wireless technology device and perform pairing again.
Up to 8 pairing history can be recorded with this unit. If
connecting to a Bluetooth wireless technology device
over 8 units, the oldest pairing history will be deleted.
If the settings are reset to the factory setting, all pairing
history will be deleted.
Switch the BT AUDIO function on or off
If you wish to switch the BT AUDIO function between on or off,
then perform the following settings.
The factory setting is ON.
1 Press
INPUT SELECT
on the front panel and
VOLUME –
at the same time and hold them for
three seconds.
2 Press
/
on the remote control to select
ON
” or “
OFF
”, then press
ENTER
on the remote
control.
3 Wait 60 seconds until “
BT Setting
disappears.
Once “BT Setting” disappears then settings are complete.
Pairing condition LED display
Pairing standby Slow flashing
Pairing completed Lit up
SBX-B70_En.book 39 ペー 01年413 月日 前1時2
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SBX-B70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SBX-B70 in the language / languages: English as an attachment in your email.

The manual is 11.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SBX-B70

Pioneer SBX-B70 User Manual - German - 68 pages

Pioneer SBX-B70 User Manual - Dutch - 65 pages

Pioneer SBX-B70 User Manual - French - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info