574227
13
Zoom out
Zoom in
Previous page
1/24
Next page
Other Functions 13
En
Chapter 4
Other Functions
Controlling the unit with
the TV remote control
The unit can learn TV remote control operation
to enable operation of the unit with the TV
remote control (learning function).
The following three functions can be operated
with the TV remote control.
• Power on/off (standby mode)
• Volume down
• Volume up
Note
• This function may not be supported depending on
the TV remote control. If it is not supported, use the
remote control supplied with the unit.
1 Turn off the TV.
2 Press
u
/I on the unit to turn off the
power.
3 Hold down both
VOLUME +
and
VOLUME –
on
the unit for three seconds to enter remote
learning setting mode.
The indicators flash green and the unit
enters remote learning setting mode.
4 Learning the three types of TV remote
signal.
Learning switching between power on and off
(standby mode).
1
Press the
u
/I on the unit.
Only the unit
s TV indicator will flash green.
2
Within one minute, point the TV remote
control at the remote control sensor on the unit
and press
STANDBY/ON
twice. (The TV remote
control signal needs to be received twice by the
unit.)
The unit
s TV indicator will change from
flashing green to being constantly lit.
TV remote control
Note
• If the green flashing continues then the learning
has not been completed. Press the
u
/I
on the unit
again and repeat the procedure.
• The following are the potential causes of the
indicator flashing red.
A signal from a type of TV remote control that
cannot be learned : This TV is not supported.
If another button has already learned the same
remote signal : First erase the already learned
function.
If a signal from a different remote control was
received during learning : Perform the operation
again.
Learning volume down.
1
Press
VOLUME
on the unit.
2
Within one minute, point the TV remote
control at the remote control sensor on the unit
and press
VOLUME
twice.
The unit
s BD/DVD indicator will change from
flashing green to being constantly lit.
Learning volume up.
1
Press
VOLUME +
on the unit.
2
Within one minute, point the TV remote
control at the remote control sensor on the unit
and press
VOLUME +
twice.
The unit
s STB ANALOG indicator will change
from flashing green to being constantly lit.
5 Hold down both
VOLUME +
and
VOLUME –
on the unit for three seconds to exit remote
learning setting mode.
Caution
• If learning failed, perform the operation
again while the power of the TV is off. The
light from the TV screen may affect remote
control learning.
• If the same operation is performed with
a different TV remote control (or different
buttons) after learning, the old functions will
be overwritten with the new ones.
• If you use the remote control when the
power states of the unit and TV are opposite
after the unit has learned the TV power
button, the function will not work properly. In
this case, press
u
/I on the unit so that the
power states of the unit and TV become the
same before using the remote control.
• The TV remote control signals may be
received by and operate both the TV and
the unit. Set one of the following.
Set audio output from the built-in speakers of
the TV to OFF.
Set the TV volume to the minimum level.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SBX-B30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SBX-B30 in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SBX-B30

Pioneer SBX-B30 User Manual - English, German, Dutch - 156 pages

Pioneer SBX-B30 User Manual - Danish - 64 pages

Pioneer SBX-B30 User Manual - French, Italian - 156 pages

Pioneer SBX-B30 User Manual - Swedish - 64 pages

Pioneer SBX-B30 User Manual - Spanish - 156 pages

Pioneer SBX-B30 User Manual - Finnish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info