574227
11
Zoom out
Zoom in
Previous page
1/156
Next page
Operations 11
En
English
Adjusting the sound
delay time (LIP SYNC
(AUDIO SYNC) )
Adjust the sound delay time to sync the sound
with the images.
The default setting is 0.
1 Press
LIP SYNC
foratleastthreeseconds.
The unit enters lip sync adjustment mode.
2 Press
VOLUME +/–
toadjustthedelay
time(press+toincreasethedelay
time).
The indicator lighting state varies depending
on the setting value.
For the indicator operation, refer to Unit
indicator operation (page 15).
3 Press
LIP SYNC
toendlipsync
adjustmentmode.
Switching the power
to standby mode
automatically (Auto
Power O)
The unit can be automatically switched to
standby mode when there is no signal and
20 minutes elapses without any operation
being performed.
The default setting is ON.
1 Press
u
/Iontheunittoturnoffthe
power.
2 Press
u
/Iforatleastthreeseconds
whilepressing
VOLUME –
ontheunit.
When this is turned on, the
/DTS
indicator
lights green.
Perform the same operation again to turn
the function off.
Enjoying music on
Bluetooth®devices
Music on Bluetooth devices such as the
following can be enjoyed wirelessly with the
unit.
Bluetooth devices: Cell phone
Bluetooth devices: Digital music player
Devices without Bluetooth function: Digital
music player + Bluetooth audio transmitter
(commercially available)
Listening to music on
Bluetooth devices
Pairing the unit and the Bluetooth device
(initial registration)
Pairing is required to enjoy the music on a
Bluetooth device with the unit. Perform pairing
the first time you use a Bluetooth device or
when the pairing data has been deleted from
the Bluetooth device.
Before starting the pairing operation, check
that the Bluetooth function on the Bluetooth
device is turned on. For details, refer to the
operating instructions for the Bluetooth device.
Once the pairing operation is performed, it
does not need to be performed again.
1 Pressthe
BT AUDIO
.
The
BT AUDIO
indicator flashes.
2 Performthepairingoperationonthe
Bluetoothdevice.
When you search for the unit from the
Bluetooth device, depending on the type
of Bluetooth device, a list of connection
(waiting) devices may be shown on the
display of the Bluetooth device (the name
shown for this unit on the display will be
[SBX-B30]).
With Bluetooth version 2.0 or lower, a PIN
code needs to be entered.
The PIN code of the unit is fixed to 0000.
3 The
BT AUDIO
indicatorlights.Check
thatpairingbetweentheunitand
Bluetoothdevicewassuccessful.
The reception range between the Bluetooth
device and unit is up to 10 m. (This value
is for use in an open space. The reception
range may vary depending on whether walls
or other structures are present.)
Note
The pairing method may vary depending on the
type of Bluetooth device.
When five minutes elapse in pairing mode, the
unit enters connection standby mode. To perform
pairing again, press
BT AUDIO
on the remote
control.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SBX-B30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SBX-B30 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 20,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SBX-B30

Pioneer SBX-B30 User Manual - English - 24 pages

Pioneer SBX-B30 User Manual - Danish, Swedish, Finnish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info