419058
7
Zoom out
Zoom in
Previous page
1/99
Next page
English Français Deutsch
Nederlands
Italiano Español
7
En
8 Auto Standby switch (AUTO STANDBY)
Switches the Auto Standby feature on/off.
When switched
ON
(the default setting is
OFF
), the
Auto Standby feature becomes active. In this mode, if
there is no input signal for 12 minutes the system
automatically switches to standby. The power is
automatically switched on again if an input signal is
detected.
NOTE:
There may be cases where a connected component
outputs noise or some other non-audio signal which
causes this system to automatically power on when in
Auto Standby mode. If this happens, switch off the
Auto Standby mode and switch the system on/off
manually.
9 Line Level Output terminal (LINE LEVEL OUTPUT)
Used for connecting other equipment through the
amplifier. The signal output from this jack is not
affected in any way by the settings of the various
controls on the unit.
10 Line Level Input terminal (LINE LEVEL INPUT)
Connect to the SUBWOOFER PREOUT terminal of an
amplifier or receiver, with the specially provided RCA
plug cord.
11 AC INLET
Connect the power cord to the powered subwoofer
unit’s AC INLET.
Connect the power cord to a AC socket.
CONNECTIONS
Before making or changing any connections, switch off the power and disconnect both this unit and the
amplifier/receiver from the AC outlet.
LINE LEVEL CONNECTION
This connection is for an amplifier or receiver equipped
with a
SUBWOOFER PREOUT
terminal. Connect to the
LINE LEVEL INPUT
terminal on this unit, using the
specially provided RCA plug cord.
NOTE:
When connected to the
PREOUT
terminal for
surround center channel on the amplifier or receiver,
the bass is heard only on the center channel, so it will
be insufficient.
OPERATION
For details regarding operating part functions, refer to
page 6.
1. Turn the POWER switch (2) ON.
If the unit’s power cord is connected to a switched AC
outlet on the amplifier or receiver and the switch is left
ON, the unit can be turned ON/OFF together with the
amplifier or receiver.
If the unit cannot be connected to the amplifier or
receiver, turn the power to the amplifier or receiver ON
before turning the power to the unit ON. When turning
the power OFF, turn the power to the unit OFF before
turning the power to the amplifier or receiver OFF.
2. Operate the amplifier or receiver and adjust the
volume of the other speakers.
3. Adjust the volume of the bass with the VOLUME
knob (3).
When necessary, operate the
CROSSOVER
knob (
4
)
and
PHASE
switch (
7
), and then adjust with the
VOLUME
knob (
3
). Set the
BASS MODE
switch (
6
) to
either
MUSIC
or
CINEMA
.
4. Turn the POWER switch (2) OFF.
The power indicator disappears.
S-LX70W/S-81W-MK
Music mode Frequency response
Frequency (Hz)
100
80
90
70
50
60
100
1000
40
10
10000
Sound pressure level (dB)
Non-bypass
(Crossover 200 Hz)
Bypass
S-LX70W/S-81W-MK
(Rear Panel)
Supplied RCA plug cord
01_S_LX70W_En.book 7 ページ 2008年7月18日 金曜日 午後5時4分
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer s lx70w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer s lx70w in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info