574058
45
Zoom out
Zoom in
Previous page
1/122
Next page
KURO LINK 12
45
En
English
FrançaisDeutsch
Nederlands
Italiano Español
English
FrançaisDeutsch
Nederlands
Italiano Español
Chapter 12
KURO LINK
Not applicable to the HTZ180/181DVD models
By connecting this unit to a KURO LINK-
compatible Pioneer flat screen TV with a HDMI
cable, you can control this unit from the
remote control of a connected flat screen TV,
as well as have the connected flat screen TV
automatically change inputs in response to
operations carried out on this unit.
In addition, when language information is
input from the connected flat screen TV, this
unit’s GUI display language automatically
changes (only when playback is stopped and
GUI screen is not displayed, with DVD/CD
function only).
Refer to the operating instructions for your flat
screen TV for more information about which
operations can be carried out by connecting
via HDMI cable.
You cannot use this function with
components that do not support KURO
LINK.
We cannot guarantee this unit will work
with KURO LINK-compatible components
other than those made by Pioneer.
Making the KURO LINK
connections
You can use synchronized operation for a
connected flat screen TV.
Be sure to connect the flat screen TV’s audio
cable to the audio input of this unit.
For the connection diagram, see 3 on page 40.
KURO LINK may not operate properly if you
do not use a High Speed HDMI cable.
Connect the flat screen TV directly to this
unit. Interrupting a direct connection with
other amps or an AV converter (such as an
HDMI switch) can cause operational errors.
Important
When connecting this system or changing
connections, be sure to switch the power
off and disconnect the power cord from the
wall socket.
After completing all connections, connect
the power cords to the wall socket.
KURO LINK Setup
You must adjust the settings of this unit as well
as KURO LINK-compatible connected
components in order to make use of the KURO
LINK function. For more information see the
operating instructions for each component.
Setting the KURO LINK mode
Choose whether to set this unit’s KURO LINK
function ON or OFF. You will need to set it to
LINK ON to use the KURO LINK function.
When using a TV that does not support the
KURO LINK function, set this to LINK OFF.
MAIN
USB
SUBMIC
PHONES
HDMI cable
HDMI cable
HDMI input
HDMI output
HDMI input
HDMI OUT
Other amps
or AV converter
This unit
KURO LINK-compatible
Pioneer flat screen TV
HTZ180_181_280_282DVD_En.book 45 ページ 2009年3月13日 金曜日 午後2時50分
Downloaded from www.Manualslib.com manuals search engine
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer S-DV180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer S-DV180 in the language / languages: English as an attachment in your email.

The manual is 13,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info