455011
11
Zoom out
Zoom in
Previous page
1/16
Next page
2 Connecting wires with RCA plugs (sold sepa-
rately)
3 From RS-P99 (sold separately) etc. (RCA out-
put)
Solderless terminal
connections
! Do not connect cords with exposed core
wires to the amplifier power terminals
(power terminal, ground terminal, system
remote control terminal), since disconnec-
tion or breakage may result in fire or short-
circuit.
! Periodically inspect and tighten the wire as
necessary.
! Do not solder or bind the ends of the
twisted wires.
! Fasten while ensuring the insulating
sheath of the wire is not clamped.
! Use the supplied hexagonal wrench to
tighten and loosen the terminal screw of
the amplifier and use it to securely fasten
the wire. Be careful to avoid excessive tigh-
tening of this screw, which may damage
the wire.
CAUTION
Use the supplied hexagonal wrench to tighten
the screws when fastening wires to the terminal.
The use of a long, commercially available hexago-
nal wrench may exert excessive torque, possibly
resulting in damage to the terminals and
wires.
Connecting the power
terminal
WARNING
! The use of a special red battery and ground
wire RD-228, available separately, is recom-
mended. Connect the battery wire directly to
the car battery positive terminal (+) and the
ground wire to the car body.
! If the battery wire is not securely fixed to the
terminal using the terminal screws, there is a
risk of overheating, malfunction and injury, in-
cluding minor burns.
1 Route battery wire from engine com-
partment to the vehicle interior.
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
of the amplifier to the positive (+) battery
terminal.
123
45 6
1 Positive (+) terminal
2 Engine compartment
3 Vehicle interior
4 Fuse (40 A) × 2
5 Insert the O-ring rubber grommet into the
vehicle body.
6 Drill a 14 mm hole into the vehicle body.
2 Connect the wires to the terminal.
Fix the wires securely with the terminal
screws.
En
11
Section
03
Connecting the units
Connecting the units
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer RS-A99 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer RS-A99 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer RS-A99

Pioneer RS-A99 User Manual - German - 20 pages

Pioneer RS-A99 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info