573928
98
Zoom out
Zoom in
Previous page
1/156
Next page
Playing and recording from a DV camcorder
09
98
En
Chapter 9
Playing and recording from a DV
camcorder
You can play back and record video from a DV camcorder
connected to the DV IN jack on the front panel of this
recorder.
Important
If you connect a second recorder using a DV cable,
you cannot control the second unit from this one.
You can’t control this unit remotely from a component
connected to the DV IN jack.
Playing from a DV camcorder
1 Make sure your DV camcorder is connected to
the front panel DV IN jack.
2 From the Initial Settings menu, check that the DV
audio input is setup as you require.
See DV Input on page 133 for more on this.
Check also that the Audio In settings for External
Audio and Bilingual Recording are as you want
them (see Audio In on page 133).
3 Select ‘DV’, then ‘DV Video Playback’
from the Home Menu.
4 Start playback on the camcorder.
Images from the camcorder should appear on your TV.
To record the incoming video, press HDD/DVD to select
the HDD or a DVD for recording, then press ì REC.
Press
STOP REC to finish recording.
If there is no signal from the device connected to the
DV jack, or the signal is copy-protected, recording
will pause. It will automatically restart once there is a
recordable signal.
The recorder will only start recording from the DV IN
jack if there is a valid signal. Recording will pause if
the signal is interrupted during recording.
If your source is copy-protected using Copy Guard,
you will not be able to record it. See Restrictions on
video recording on page 79 for more details.
Recording from a DV camcorder
Using the recorder’s remote, you can control both the
camcorder and this recorder.
Important
The source signal must be DVC-SD format.
Some camcorders cannot be controlled using this
recorder’s remote.
You can’t record date and time information from DV
cassette.
During DV recording, if a part of the tape is blank, or
has copy-protected material on it, this recorder will
pause recording. Recording will restart automatically
when there is a recordable signal. However, if there is
more than 10 seconds of blank tape, this recorder will
stop recording and the camcorder should stop
(depending on the camcorder).
For best results when recording from a DV camcorder to
this recorder, we recommend cueing the camcorder to
the place you want to start recording from and setting the
camcorder to play-pause.
1 Make sure your DV camcorder is connected to
the front panel DV IN jack.
Also, set the camcorder to VTR mode.
2 Set the recording quality.
See Setting the picture quality/recording time on
page 82 for detailed information.
3 From the Initial Settings menu, check that the DV
audio input is setup as you require.
See DV Input on page 133 for more on this.
Check also that the Audio In settings for External
Audio and Bilingual Recording are as you want
them (see Audio In on page 133).
4 Select ‘DV’, then ‘Copy from a DV
Source’ from the Home Menu.
DV recording only works when the DV camcorder is
in VTR mode with a tape loaded.
5 Select ‘Record to Hard Disk Drive’ or
‘Record to DVD’.
HOME MENU
REC MODE
HOME MENU
ENTER
Downloaded from www.Manualslib.com manuals search engine
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer RCS-656HX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer RCS-656HX in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer RCS-656HX

Pioneer RCS-656HX User Manual - English - 156 pages

Pioneer RCS-656HX User Manual - Danish - 464 pages

Pioneer RCS-656HX User Manual - French - 155 pages

Pioneer RCS-656HX User Manual - Swedish, Finnish - 464 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info