573928
128
Zoom out
Zoom in
Previous page
1/156
Next page
The Video Adjust menu
15
128
En
3 Select the picture quality setting you want to adjust.
You can adjust the following settings:
Prog. Motion – Adjusts the motion and still picture
quality when video output is set to progressive. (Prog.
Motion is ineffective when PureCinema is On.)
PureCinema – This setting optimizes the picture for
film material when the video output is set to
progressive. Usually set to Auto 1 but try switching
to Auto 2, On or Off if the picture appears unnatural.
Subtitle Adjust – When the video output is set to
progressive scan, it’s possible that the subtitles in
some movies will disappear unnaturally. In this case
select the On setting (only possible when connected
using HDMI).
YNR – Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
CNR – Adjusts the amount of noise reduction (NR)
applied to the C (colour) component (only possible
when connected using HDMI).
BNR – Adjusts the amount of noise reduction (NR)
applied to the block noise (artefacts visible in areas of
flat colour, caused by MPEG compression).
MNR – Adjusts the amount of noise reduction (NR)
applied to the mosquito noise (artefacts visible
around the edges of an image, caused by MPEG
compression).
Sharpness – Adjusts the sharpness of the high-
frequency (detailed) elements in the picture.
Detail – Adjusts how sharp edges appear.
White Level – Adjusts the intensity of white.
Black Level – Adjusts the intensity of black.
Black Setup – Corrects the standard reference black
level (NTSC video playback on the Interlace video
output setting only). (Black Setup is ineffective for
HDMI output.)
Gamma Correction – Adjusts the brightness of
darker images.
Hue – Adjusts overall balance between red and
green.
Chroma Level – Adjusts how rich the colours
appear.
4 Use the / buttons to adjust the currently
selected picture quality setting.
5 When you have all the settings as you want
them, press HOME MENU to exit.
Tip
To see more of the picture as you adjust different
settings, press ENTER after selecting the setting you
want to adjust.
YNR and Detail are ineffective for analog and
component video when the Video Priority Mode is set
to HDMI. Set to Component to make effective for
both analog and HDMI video. See page 137.
Memory1
Subtitle Adjust
YNR
Motion Still
PureCinma
Prog. Motion
Auto1
Off Max
Off Max
BNR
MNR
Max
Max
Off
Min
CNR
On
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer RCS-656HX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer RCS-656HX in the language / languages: English as an attachment in your email.

The manual is 9,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer RCS-656HX

Pioneer RCS-656HX User Manual - English - 156 pages

Pioneer RCS-656HX User Manual - Danish - 464 pages

Pioneer RCS-656HX User Manual - French - 155 pages

Pioneer RCS-656HX User Manual - Swedish, Finnish - 464 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info