573928
56
Zoom out
Zoom in
Previous page
1/156
Next page
Getting started
04
56
En
Chapter 4
Getting started
Switching on and setting up
When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator feature. This takes you through setting the
clock, the internal TV tuner and the video output.
If you’re using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
1 Switch on your TV and set the video input to this
recorder.
2 Switch on the recorder.
When you switch on for the first time, your TV should
display the Setup Navigator screen (If the Setup
Navigator doesn’t appear, you can also access it from the
Initial Setup menu; see page 129).
If this recorder is connected to a compatible TV using
a fully-wired 21-pin SCART cable, the recorder will
take a few seconds to download country, TV screen
size and language information. (Check the manual
that came with your TV for compatibility information.)
3 Choose a language (then press ENTER).
4 Start the Setup Navigator.
If you don’t want to use the Setup Navigator, press
to select Cancel, then press ENTER to exit the Setup
Navigator.
5 Select an Aerial Power setting
1
for the
built-in digital tuner.
On: power is always supplied to the connected aerial,
whether the recorder is on or in standby.
Auto
: power is only supplied when this recorder is on.
Off: power is never supplied to the aerial.
6 Select ‘Auto Scan’ to start scanning for
D.TV channels.
Select Do not set if you want to skip D.TV channel
setup (because they have already been set up, for
example), then skip to step 8 below.
7 Select your country.
The recorder starts scanning for new channels. After the
scan is complete the recorder will let you know how many
new channels were found.
The country setting will apply to both the digital and
analog TV tuners.
The clock will also be set automatically here if D.TV
channels are found.
If no new channels were found a message appears
asking if you want to scan again. Check the aerial
connection before selecting Yes. (If you select No,
skip to step 8 below.)
8 Select the analog TV (A.TV) Auto Channel
Setting (‘Auto Scan’ or ‘Download from TV’), or ‘Do
not set’.
Select Do not set if you want to skip channel setup
(because they have already been set up, for example).
You can only use the Download from TV feature if
this recorder is connected to your TV using a fully-
wired 21-pin SCART cable via the AV1(RGB)-TV
connector, and if your TV supports this function
(check your TV’s instruction manual for more
details).
RECORDER
ENTER
Initial Setup
Basic
Digital Tuner
Analogue Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Clock Setting
Input Line System
Power Save
HELP
EPG
Pause Live TV
Setup Navigator
Setup Navigator
Language
Basic
ENTER
k
Setting
t
Line System
e
r Save
P
p
Navigator
p
Navigator
Start
Cancel
Start
Complete this setup before you
start using your recorder.
Please use the Initial Setup if you
want to make more detailed settings.
Note
1 If the recorder does not accept the On or Auto setting (the highlight jumps back to Off), check that the antenna is properly connected and
that it is not shorted, then try making the setting again.
ENTER
ENTER
ENTER
ENTER
k
Setting
t
Line System
e
r Save
P
p
Navigator
p
Navigator
Auto Channel Setting
English
Download from TV
Do not Set
Auto Scan
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer RCS-656HX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer RCS-656HX in the language / languages: English as an attachment in your email.

The manual is 9,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer RCS-656HX

Pioneer RCS-656HX User Manual - English - 156 pages

Pioneer RCS-656HX User Manual - Danish - 464 pages

Pioneer RCS-656HX User Manual - French - 155 pages

Pioneer RCS-656HX User Manual - Swedish, Finnish - 464 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info