707105
14
Zoom out
Zoom in
Previous page
1/132
Next page
En
14
Operation
Turning the power on
1 Make all the connections, then plug the power cord
into a power outlet.
= Connections (p. 12 )
2 Change the [POWER] switch to the [ON] side to turn
on the power of the unit.
This unit’s indicators light and the power turns on.
Turning the power off
Change the [POWER] switch to the [OFF] side to turn off
the power of the unit.
This unit’s power turns off.
Playback
Prepare as follows.
! Place a record on the turntable.
! Remove the stylus cover and arm clamper.
1 Change the [POWER] switch to the [ON] side to turn
on the power of the unit.
2 Select the rotation speed to match the record to be
played by pressing a speed change button.
3 Press the [START/STOP] button.
The turntable rotates.
4 Pull up the lifter lever and move the tone arm onto
the record.
5 Push down the lifter lever.
The tone arm slowly descends and playback begins.
Pausing playback
Pull up the lifter lever.
The stylus of the cartridge lifts away from the record.
! To resume playback, push down the lifter lever.
Finishing playback
1 Pull up the lifter lever to return the tone arm to the
arm rest and then push down the lifter lever.
2 Press the [START/STOP] button.
The turntable stops smoothly.
3 Change the [POWER] switch to the [OFF] side to turn
off the power of the unit.
Use the arm clamper to secure the tone arm.
To protect the stylus tip, attach the stylus cover.
Close the dust cover.
Adjusting the pitch
Move the [TEMPO] slider forward or backward.
Moving the slider forward increases the rotation speed and moving it
backward decreases the rotation speed.
! When the [TEMPO] slider is at the center, the indicator lights in
yellow-green and the rotation speed becomes the specified rpm
(33 1/3 rpm, 45 rpm, or 78 rpm).
! The scale of the [TEMPO] slider is a rough value. Please use it as a
guide.
! You can confirm that the rotation speed has become the specified
rpm by looking at the four rows of strobe patterns inscribed around
the turntable.
Strobe pattern
1 When the strobe pattern appears stopped, 33 1/3 rpm (50 Hz power
supply)
2 When the strobe pattern appears stopped, 45 rpm (50 Hz power
supply)
3 When the strobe pattern appears stopped, 33 1/3 rpm (60 Hz power
supply)
4 When the strobe pattern appears stopped, 45 rpm (60 Hz power
supply)
! A strobe illuminator (red LED light) is used to illuminate the strobe
pattern of this unit. When checking the pitch, always use the strobe
illuminator light.
Displaying a record jacket
Place the record jacket behind the stoppers attached to the dust cover
as shown in the figure.
StoppersRecord jacket
! Do not place anything other than a record jacket.
! Place the record jacket secured behind the stoppers properly.
! When using this feature during playback, be careful that the record
jacket does not fall. The record or stylus may be damaged.
! Be careful not to close the dust cover while a record jacket is placed
on it.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer PLX-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PLX-500 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info