707105
8
Zoom out
Zoom in
Previous page
1/132
Next page
En
8
Part names and functions
Top panel
1
2 3 45 6
c
d
e
f
ghij
a9
7
b
8
1 POWER switch
When turning the switch to the [ON] side, the power is turned on and
the strobe illuminator on the side lights.
= Turning the power on (p. 14 )
Turning the power off (p. 14 )
2 START/STOP button
Pressing the button starts or stops rotation of the turntable.
= Playback (p. 14 )
3 Speed change button
Changes the speed according to the record to be played.
! For a 33 1/3 rpm record, press the [33] button.
! For a 45 rpm record, press the [45] button.
! For a 78 rpm record, press the [33] button and [45] button at the
same time.
= Playback (p. 14 )
4 Stylus illuminator
Lights to illuminate the stylus tip.
= Illuminating the stylus tip (p. 15 )
5 Stylus illuminator switch
The stylus illuminator lights in white and ascends to the position at
which the stylus tip is illuminated.
= Illuminating the stylus tip (p. 15 )
6 Headshell
7 TEMPO slider
You can slide back and forth to perform fine adjustment of the rota-
tion speed.
= Adjusting the pitch (p. 14 )
8 Tone arm
= Adjustment (p. 10 )
9 Arm clamper
Clamps the tone arm.
a Arm rest
Serves as the support base for the tone arm.
b Lifter lever
The tone arm goes up when the lever is pulled up. The tone arm goes
down when the lever is pushed down.
c Arm lifter
This device is used to move the tone arm up and down. It is operated
by the lifter lever.
d ANTI SKATING dial
When a record is played, there is power to pull the stylus tip toward
the inner perimeter. By matching this dial to the stylus pressure
value, that power is eliminated.
= Adjusting anti-skating (p. 11 )
e HEIGHT ADJUST lock
Locks the adjusted height of the arm.
= Adjusting the arm height (p. 11 )
f HEIGHT ADJUST dial
Used to adjust the height of the tone arm.
= Adjusting the arm height (p. 11 )
g Balance weight
Used to balance the tone arm and adjust the stylus pressure.
= Adjustment (p. 10 )
h Stylus pressure adjustment ring
Used to match to the appropriate stylus pressure of the cartridge.
= Adjusting the stylus pressure (p. 10 )
i Headshell stand
Used to stand the headshell up.
j Adapter for EP record
Used to play standard EP records.
= To play a standard EP record (p. 15 )
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer PLX-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PLX-500 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info