17999
56
Zoom out
Zoom in
Previous page
1/64
Next page
56
6 Finalizing and Erasing 6 Finalisation et effacement
En/Fr
3 Press * (^ on the front panel) to
start erasing.
The display shows the time remaining to completion.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
You can halt this erase process by holding down the &
button for 10 seconds. However, because the erase operation
has not been fully completed, the information on the disc
cannot be guaranteed. The next time you use the disc be
sure to completely erase the disc.
Re-initializing a disc
1 Press and hold ERASE for about four
seconds.
The display indicates disc erase mode:
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
After a short time, the unit goes into erase standby mode:
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
The Play light on the recorder also blinks.
Press & to cancel all disc erase here.
2 Press * (^ on the front panel) to
start erasing.
The process takes about five minutes plus the entire length
of the disc. The display shows the time left to completion.
You can halt this erase process by holding down the &
button for 10 seconds. However, because the erase operation
has not been fully completed, the information on the disc
cannot be guaranteed. The next time you use the disc be
sure to completely erase the disc.
3 Appuyez sur * (^ sur le panneau
avant) pour démarrer l'effacement.
L'affichage indique le temps restant jusqu'à l'achèvement.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
Vous pouvez interrompre le processus d'effacement en
maintenant & pressé pendant 10 secondes. Mais comme
l’opération d’effacement n’est pas totalement achevée, les
informations sur le disque ne sont pas garanties. A
l’utilisation suivante du disque, effacez-le entièrement.
Reinitialisation d’un disque
1 Maintenez ERASE presse environ
quatre secondes.
L'affichage indique le mode d'effacement du disque:
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
Au bout d'un moment, l'appareil passe en mode d'attente
d'effacement:
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
Le témoin de lecture de l’enregistreur clignote aussi.
Appuyez sur & pour annuler l'effacement de tout le disque
ici.
2 Appuyez sur * (^ sur le panneau
avant) pour démarrer l'effacement.
Cela exige environ cinq minutes, plus toute la longueur du
disque. L'affichage indique le temps restant jusqu'à
l'achèvement.
Vous pouvez interrompre le processus d'effacement en
maintenant & pressé pendant 10 secondes. Mais comme
l’opération d’effacement n’est pas totalement achevée, les
informations sur le disque ne sont pas garanties. A
l’utilisation suivante du disque, effacez-le entièrement.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer PDRL77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PDRL77 in the language / languages: English, French as an attachment in your email.

The manual is 4,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info