17965
30
Zoom out
Zoom in
Previous page
1/44
Next page
30
En
6 More recording features
If the disc is already named, the character
display shows the name (or the first 12
characters if it is too long to be displayed
completely), with a blinking cursor under
the first character.
4 Select/change the character at
the current cursor position by
turning the jog dial.
See below for the complete list of letters,
numbers, and symbols available.
If you’re using the remote control, use
numbers keys 1-9 for numbers and the
letters shown above each key. Press a key
repeatedly to cycle through the letters and
numbers on that key.
Characters available for disc and track
names:
ABCDEFGHIJKLMNOPQRST
UVWXYZ
abcdefghijklmnopqrstuvwxyz
1234567890
!"#$%&’()*+,-./<=> ?
@[]ˆ_'{|}<space>
5 Change between uppercase,
lowercase, and numbers/
symbols by pressing DISPLAY/
CHARA.
The case of the character at the current
cursor position changes between upper-
and lowercase and numbers/symbols with
each press.
6 Confirm the character and
move the cursor to the next
character position by pressing
the jog dial (or ¡).
For the remote, move the cursor to the next
character position by pressing ENTER.
Move the cursor backwards or forwards
along the display using 1 and
¡.
Insert a new character into a name by
moving the cursor to the character
position you want and repeating steps
4–6.
TEXTMARK
ABC DEF
GHI MNOJKL
PQRS TUV WXYZ
123
4
56
78
9
10/0 >10
0!"#$%&’()*+,-./<=>
?@[]ˆ_'{|}<space>
◊ÛB
-
>?/
MONITOR
INPUT
SELECTOR
AUTO
MANUAL
AUTO
MANUAL
TRACK NO.
WRITE
TIME
FINALIZEERASE
SCROLL
5
ENTER
CURSOR
MENU/
DELETE
NAMEMARK
SET
CLEAR
DISPLAY
/CHARA
7
1
¡
8
3
4
¢
ABC DEF
GHI MNOJKL
PQRS TUV WXYZ
REC SYNCHRO
REPEAT RANDOM NAME CLIP
I
NPUT
SELECTER
FADER
SKIP PLAY
SKIP ID
PROGRAM CHECK CLEAR
AUTO /
MANUAL
123
4
56
78
9
10/0 >10
SCROLL
TIME
Î
•
4
5
6
2,7
7
7
6
3,6
6
DIGITAL
REC LEVEL
ANALOG
REC LEVEL
MENU/
DELETE
TEXT
SYNCHRO
PUSH ENTER
RL
ANALOG
REC BALANCE
Legato Link Conversion
CD TEXT
6
2,7
3,6
6
Using CD text
You can name a CD-R or CD-RW so that
when you load the disc into the player, the
disc name, track title, or artist name can
appear in the display. Each title can be up
to 120 characters long, including spaces.
You can store all the text (up to 2000
characters) for up to three non-finalized
discs in the recorder at one time. This is
useful when you want to edit the text
during another recording session with the
same disc.
Be careful: When you set text for a
fourth disc, the oldest text information (for
the first disc) is deleted from memory. Text
with CD-RW discs is deleted when you
erase the corresponding track.
Once you finalize a CD-R, the text
information cannot be changed. Finalized
CD-Rs containing CD text can still be
played on ordinary (non-CD text
compatible) CD players, however the CD
text will not appear in the display.
1 Make sure the disc you want to
name is loaded into the
recorder and is stopped.
For track names: Before proceeding to
step 2, you must choose the track you want
to name by turning the jog dial.
You can also name tracks during
playback.
2 Press NAME.
Press NAME to switch between disc and
artist name:
If you are naming a track, go to
step 3.
The default is disc title. Press 7 at any
time to exit.
3 Wait two seconds after making
your selection, or press ENTER.
If the disc doesn't already have a name,
the character display is blank, with a
blinking cursor on the first character.
DISC NAME
ARTIST NAME
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer PDR609 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PDR609 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer PDR609

Pioneer PDR609 User Manual - German - 72 pages

Pioneer PDR609 User Manual - Danish - 72 pages

Pioneer PDR609 User Manual - French - 44 pages

Pioneer PDR609 User Manual - Italian - 72 pages

Pioneer PDR609 User Manual - Portuguese, Spanish - 72 pages

Pioneer PDR609 User Manual - Norwegian - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info