141018

Pioneer pdp-607xd Manual

60
Zoom out
Zoom in
Previous page
1/219
Next page
60
En
Enjoying through External Equipment
12
NOTE
• If you select a parameter other than “Auto”, make such a
setting that results in natural colour.
• If no image appears, specify another digital video signal type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equipment.
To specify the type of audio signals:
When you use the INPUT 3 HDMI terminal, use the following
procedure to specify the type of audio signals.
1 Repeat steps 1 to 3 provided for “To activate the HDMI
terminal.”
2 Select “Audio” ( / then ENTER).
3 Select the type of audio signals ( / then ENTER).
• If you select “Auto”, an attempt will be made to identify
the type of audio signals when audio signals are
received.
4 Press HOME MENU to exit the menu.
NOTE
• The INPUT 4 HDMI terminal accepts only digital audio
signals.
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the
operation manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analogue audio cables.
Using i/o link.A
The Plasma Television incorporates three typical i/o link.A
functions for smooth connections between Plasma Television
and other audiovisual equipment.
One Touch Play
While the Plasma Television is in standby mode, it
automatically turns on and plays back images from the
audiovisual source (e.g. VCR, DVD).
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR has the
WYSIWYR button, you can automatically start recording by
pressing the WYSIWYR button.
Preset Download
Automatically transfers channel preset information from the
tuner on the Plasma Television to the one on the connected
audiovisual equipment (e.g. VCR) via the INPUT 2 or 3 terminal.
To select the SCART terminal which is available for
i/o link.A:
Select the INPUT terminal to which the recording equipment
(e.g. VCR) you use has been connected.
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “i/o link.A” ( / then ENTER).
4 Select the desired parameter ( / then ENTER).
5 Press HOME MENU to exit the menu.
NOTE
• The i/o link.A functions work only when the audiovisual
equipment is connected to the INPUT 2 or 3 terminal on the
Plasma Television with i/o link.A via a fully wired 21-pin
SCART.
• Refer to operation manuals of each external equipment for
the details.
• If a SCART cable has been connected to the INPUT 3
terminal with the i/o link.A activated, input signals (other
than Component) are automatically identified and displayed.
If the i/o link.A has been deactivated, Video is always
selected for signals other than RGB because the system
cannot identify among RGB, Y/C (S-Video), and CVBS (Video)
signals; for example, receiving Y/C (S-Video) signals results
in monochrome display.
Item Description
Auto
(factory default)
Automatically identifies input audio signals.
Digital Accepts digital audio signals.
Analogue Accepts analogue audio signals.
Item Description
INPUT 2
(factory default)
INPUT 2 is available for i/o link.A.
INPUT 3 INPUT 3 is available for i/o link.A.
Pl
asma
T
e
l
ev
i
s
i
on
(
rear v
i
ew
)
SCART cable
(commercially available)
VCR or DVD/HDD
Recorder (DVR)
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer pdp-607xd at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer pdp-607xd in the language / languages: English, German, French as an attachment in your email.

The manual is 26,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer pdp-607xd

Pioneer pdp-607xd User Manual - Dutch, Italian - 219 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info