140856
48
Zoom out
Zoom in
Previous page
1/171
Next page
48
En
Enjoying through External Equipment
10
Connecting control cords
Connect control cords between the Plasma Television and
other PIONEER equipment having the t logo. You can then
operate the connected equipment by sending commands from
its remote control unit to the remote control sensor on the
Plasma Television.
After the CONTROL IN terminals have been connected, the
remote control sensors on the connected equipment do not
accept commands from the remote control units. Face the
remote control units to the remote control sensor on the
Plasma Television when operating the connected equipment.
NOTE
Make sure that the power is turned off when making
connections.
Complete all component connections before making control
cord connections.
About SR+
The CONTROL OUT terminal on the rear of the Plasma
Television supports SR+ that allows linked operations with a
PIONEER AV receiver. SR+ presents functions such as the
input switch linkage operation function and the DSP surround
mode display function. For more information, see the
instruction manual that came with the PIONEER AV receiver
supporting SR+.
NOTE
While in connection through SR+, the volume on this system
is temporarily minimized.
When making control cord connections, use the SR+ cable.
When making control cord connections with one or more
pieces of Pioneer equipment, directly connect the Plasma
Television and the Pioneer amplifier that supports SR+. Do
not connect other equipment between them.
Controlling other equipment using the
supplied remote control unit
Using the supplied remote control unit, you can control other
equipment in connection: a set-top box (STB), DVD player,
DVD/HDD recorder (DVR), or VCR.
Before using this function, you need to preset the supplied
remote control unit with the manufacture code of the
equipment to be controlled. When you then want to control the
equipment, press SELECT on the remote control unit to select
an appropriate mode depending on the equipment; the
selection is switched among TV, STB, DVD/DVR, and VCR. The
corresponding mode indicators on the remote control unit
show the currently selected mode.
Presetting manufacture codes
1 Press SELECT on the remote control unit to select the STB,
DVD/DVR, or VCR mode depending on the equipment.
2 After confirming that the indicator of the previously
selected mode goes off, press and hold SELECT, and then
press 1 on the remote control unit.
The corresponding mode indicator flashes.
3 Press 0 to 9 to enter a 3-digit manufacture code.
See the manufacture code list on page 49 to identify an
appropriate code.
The mode indicator lights up for approximately one
second and then goes off; presetting the manufacture
code is completed.
CONTROL
IN
OUT
CONTROL
IN
OUT
CONTROL
IN
OUT
asma
e
ev
s
on
rear v
ew
When
SR+
is not used:
The control cables (commercially
available) are mono sound cables
with mini plugs (no resistance).
When
SR+
is used:
Use the
SR+
cable (available as
option).
SELECT
TV STB
DVD/
DVR
VCR
SOURCE
P
1 2 3
4 5 6
7 8 9
PC
0
INFO
INPUT 5
SELECT
TV STB
DVD/
DVR
VCR
SOURCE
P
PDP507XA.book Page 48 Tuesday, June 20, 2006 1:44 PM
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer pdp-507xa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer pdp-507xa in the language / languages: English, German, French as an attachment in your email.

The manual is 13,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer pdp-507xa

Pioneer pdp-507xa User Manual - Dutch, Italian, Spanish - 171 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info