140856
35
Zoom out
Zoom in
Previous page
1/171
Next page
35
En
Basic Adjustment Settings
08
English
Listening to audio from the sub screen
using headphones
With headphones connected, you can listen to audio coming
from the sub screen when in the 2-screen or picture-in-picture
mode; audio coming from the main screen is output from the
speakers. To use this function, follow the procedure below.
1 Press HOME MENU.
2 Select “Sound” ( / then ENTER).
3 Select “Headphone Output” ( / ).
4 Select the desired parameter ( / ).
5 Select “Sub Volume” ( / ).
6 Select the desired volume level ( / ).
7 Press HOME MENU to exit the menu.
NOTE
To adjust the volume for headphones after selecting “Sub”,
always use the menu item (shown in the procedure) no
matter whether the screen is in the single, 2-screen, or
picture-in-picture mode. When the screen is in the single
mode with “Sub” selected, audio coming from the screen is
output from speakers even with headphones connected.
Audio from a connected subwoofer is muted when you have
selected “Sub” for “Headphone Output” and connected
headphones.
Power Control
Power Control provides convenient functions for power saving.
Energy Save
You may use one of the three Energy Save modes to save power
consumption.
1 Press HOME MENU.
2 Select “Power Control” ( / then ENTER).
3 Select “Energy Save” ( / then ENTER).
4 Select “Save 1”,”Save 2”, or “Picture Off” ( / then
ENTER).
5 Press HOME MENU to exit the menu.
NOTE
You can also select this function using the Home menu
when the input source is a PC.
When you change the Energy Save mode, you may notice a
change in the panel sound. This is normal.
No Signal off (AV mode only)
The system will be automatically placed into the standby mode
if no signal is received for 15 minutes.
1 Press HOME MENU.
2 Select “Power Control” ( / then ENTER).
3 Select “No Signal off” ( / then ENTER).
4 Select ”Enable” ( / then ENTER).
5 Press HOME MENU to exit the menu.
NOTE
Five minutes before the system is placed into the standby
mode, a message appears every minute.
The system may not be placed into the standby mode when
noise signals are present at the Plasma Television after a TV
programme finishes.
Item Description
Main
(factory default)
Audio coming from the main screen is output
from the PHONES output terminal.
Sub
When in the 2-screen or picture-in-picture mode,
audio coming from the sub screen is output
from the PHONES output terminal.
Front Surround
Headphone Output
Sub Volume
Off
15
Main
Front Surround
Headphone Output
Sub Volume
Off
Sub
15
Item Description
Standard Does not decrease the picture brightness.
Save1 Slightly lowers power consumption while
slightly suppressing the brightness drop level.
Save2 Decreases the picture brightness and lowers
power consumption.
Picture Off Deactivates the screen to save power. To restore
the screen display, press any button other than
i +/i and e.
This setting is not memorized by the system.
Item Description
Disable
(factory default)
Does not place the system into the standby
mode.
Enable Places the system into the standby mode if no
signal is received for 15 minutes.
PDP507XA.book Page 35 Tuesday, June 20, 2006 1:44 PM
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer pdp-507xa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer pdp-507xa in the language / languages: English, German, French as an attachment in your email.

The manual is 13,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer pdp-507xa

Pioneer pdp-507xa User Manual - Dutch, Italian, Spanish - 171 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info